期刊文献+

杉木CTMP过氧化物-TAED活化体系的漂白性能

Bleaching of China Fir CTMP Pulp with Peroxides Activated by TAED
下载PDF
导出
摘要 以速生杉木CTMP为原料进行了H2O2、过碳酸钠(PC)和过硼酸钠(PB)与TAED组成的活化体系漂白性能的研究。过氧化物-TAED活化体系漂白反应可以在短时间内完成,适宜的漂白温度55~70℃、漂白时间60min;当过氧化物用量6%~8%时,浆料白度增值可达27%~29%;此漂白体系可使漂后浆料抗张指数、撕裂指数和耐破指数分别提高48%~74%、19%~32%和37%~54%。 Bleaching of CTMP Pulp which was produced from China fir , Cunninghamia lanceolata respectively with hydrogen peroxide , Sodium perborate and sodium percabonate activated by TAED was investigated in this paper. Compared with the peroxide bleaching without TAED, the bleaching with peroxide-TAED system can be carried out at lower temperature (55 -70℃ ) and shorter time (60 min). TAED dosage was optimized and the suitable mole ratio of TAED to H2O2 is 0. 1. The CTMP pulp with initial brightness of 43.8% can obtain a brightness gain of 29.3% by bleaching with H2O2-TAED system under the following conditions: 70℃, 60min, the mole ratio of TAED to H2O2 0.1, 6% H2O2 dosage on oven dry pulp. Similarly a brightness gain of 27.6% ISO and 27.4% ISO can be obtained respectively by bleaching with sodium perborate-TAED and sodium percarbonate-TAED bleaching system at a dosage level of 8% of the peroxides on oven dry pulp calculated as H2O2.
出处 《中国造纸》 CAS 北大核心 2009年第B12期9-12,共4页 China Pulp & Paper
关键词 机械浆漂白 过氧化氢 过硼酸钠 过碳酸钠 四乙酰乙二胺 mechanical pulp bleaching hydrogen peroxide sodium perborate sodium percarbonate TAED
  • 相关文献

参考文献5

  • 1周亚军,张栋基,李甘霖.漂白高得率化学机械浆综述[J].中国造纸,2005,24(5):51-60. 被引量:84
  • 2Leduc C,Garceau M,Daneault C,et al.Bleaching of a mechanical pulp with Sodium Percarbonate and Amineborane-Bleaehing Response and Brightness Stability[J].JPPS,2002,28(5):171.
  • 3Ledue C,Montillet C,Daneault C.Activator for bleaching of mechanical pulp[J].Appita J.,1998,51(4):306.
  • 4赵建平,王祥荣,江思源.TAED及其对H_2O_2漂白的活化作用[J].印染助剂,2003,20(3):12-14. 被引量:25
  • 5Moldenius S.The effect of peroxide bleaching on the strength and aurface properties of mechanical pulps[J].JPPS,1984,10(6):172.

二级参考文献18

  • 1ghou Y, Cannell E. Bleached high yield pulp: processes, installations and end uses[C]. B231. Proceedings of Paptae 91^st annual meeting. Montreal(Canada), 2OO5.
  • 2Gentile V M, Tschichimer U, Wilder H D. The Scott Paper Alkaline Peroxide Mechanical Pulping Process[ C ]. International Mechanical Pulping Conference Proceeding.
  • 3Bohm W L, Sferrazza M J.Alkaline Peroxide Mechanical Pulping, a Revolution in High Yield Pulping[C]. International Mechanical Pulping Conference Proceedings. Helsinki(Finland), 1989.
  • 4Xu E. A New Concept in Alkaline Peroxide Refiner Mechanical Pulping[ C ]. International Mechanical Pulping Conference. Houston(USA), 1999.
  • 5Zhou Y. Research and Product Development in High-yield Pulp (HYP)[C].Proceedings of the 2nd ISETPP Conference.Guangzhou(China),2002,210
  • 6Rydholm S A. Pulping Processes. Florida(US) :Robert E Krieger Publishings Company, 1985.
  • 7Zhou Y. Overview of HYP in paper and board [ C ]. Paptac 90^th annual meeting (B) . Montreal( Canada) ,2004.143.
  • 8Zhou Y, Zou X. Achieving desired end-use performance by using HYP in wood-free coated papers[C] .International Mechanical Pulping Conference.Quebec(Canada), 2003.15.
  • 9Hu K,et al. Substitution of HW kraft with aspen HYP in LWC wood-free papers[C]. Paptac 90th annual meeting[C]. Montreal(Canada), 2004.95.
  • 10Zou X, Begin P, S Deschatelets, et al. The Impact of Lignin on Paper Permanence. A Comprehensive Study of the Ageing Behaviour of Handsheets and Coammrcial Paper Samples[J]. Restaurator, 1998,19:135.

共引文献106

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部