期刊文献+

动态复合电化学法处理CTMP废液

Application Of Dynamic Compound Electrolysis Process in CTMP Effluent Treatment
下载PDF
导出
摘要 采用以钛片为基体的修饰电极和自行研制的高效粒子电极构成的动态复合电解床,处理桉木和马尾松混合CTMP制浆废液,考察了修饰电极不同金属氧化物涂层和主要操作参数对废液色度和CODCr,去除的影响,得到了动态复合电化学工艺主要参数的最佳组合。实验结果表明,最佳工艺条件下废液的脱色率可达95%以上,CODCr去除率达到60%。 A dynamic compound electroysis cell bed, consisted of modified titanium base electrode and the high efficient particle electrode which was developed by the authors, was applied to treat the effluent from CTMP pulping of mixed Eucalyptus and Chinese red pine. Different modified electrode materials and main operation parameters were investigated, the optimum coditions were determined. The results showed that the effluent color removal rate was above 95% and COD removal rate was above 70% in the optimum conditions.
出处 《中国造纸》 CAS 北大核心 2009年第B12期86-88,共3页 China Pulp & Paper
关键词 修饰电极 电氧化 CTMP废液 modified electrode electrical oxidation CTMP effluent
  • 相关文献

参考文献3

  • 1Rjeshwar K,et al.Electrochemistry and the environment[J].J Appl Electrochem,1994,24:1077.
  • 2张招贤.钛电极工学[M].北京:冶金工业出版社,2003..
  • 3CPPA.Techncal Section Standard Method H5P[S].Color of Pulp Mill Effluents,1974.

共引文献36

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部