期刊文献+

ICP-AES法测定铁矿石尾矿磁性铁中的硅、铝、硫、钙和锰 被引量:2

Determination of Silicon,Aluminum,Sulfur,Calcium and Manganese in Magnetic Iron Ore Tailings by ICP-AES
下载PDF
导出
摘要 通过对铁矿石尾矿中磁性铁的选磁,烘干称重后用硝酸盐酸分解样品。在工作曲线中加入基体,采用基体匹配办法消除铁的干扰。按选定的实验条件,可多种元素同时分析的优点,快速分析磁性铁中的杂质元素。线性相关系数r=0.9999,硫酸根的检出限为0.004%,其它在0.0002%~0.001%,回收率均在98%~105%之间,完全满足实际分析要求。 Through magnetically selecting from magnetic iron tailings, magnetic iron samples are stoved, weighted and further decomposed using nitric acid and hydrochloric acid. According to specific experimental conditions, a fast analysis is performed to filter impurity elements from these magnetic iron samples by adding the base into the working curve and reducing the disturbances of iron.Linear correlation coefficient r = 0.9999, detection limit of sulfate is 0.004%, others at 0.0002% -0.001%, recovery percentages are between 98% and 105%, which fully meet the requirements for analysis in practice.
作者 张新卫
出处 《现代科学仪器》 2010年第5期103-104,共2页 Modern Scientific Instruments
关键词 ICP-AES 铁矿石尾矿 磁性铁 多元素测定 ICP-AES Magnetic iron ore tailings Multi-element determination
  • 相关文献

参考文献3

二级参考文献6

共引文献31

同被引文献11

引证文献2

二级引证文献13

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部