期刊文献+

C/C-SiC机织复合材料尺度参数对力学性能的影响 被引量:5

Effects of different scale parameters on effective modulus of woven C/C-SiC composites
原文传递
导出
摘要 针对C/C-SiC纤维机织复合材料的特点,建立了C/C-SiC微结构有限元模型,并结合能量法研究了不同微结构关联参数对C/C-SiC机织复合材料宏观力学性能的影响。研究结果表明:本文中提出的C/C-SiC微结构有限元模型能够有效地反映C/C-SiC复合材料尺度关联参数对C/C-SiC力学性能的影响,纤维丝尺度的各个参数主要与C/C-SiC纤维束的力学性能相关联;纤维束尺度的各个参数主要与C/C-SiC宏观构件的整体性能相关联。 A finite element model of C/C-SiC microstructure characterizing different scale parameters was established for the woven C/C-SiC composites.The strain energy method was used to study the effects of relevant parameters of the microstructure on the macroscopic performances of C/C-SiC composites.The numerical computing results were compared for many cases of C/C-SiC composites with different scale parameters.It is shown that the elastic properties of C/C-SiC composites are associated with the scale parameters identified in the C/C-SiC composites.The effective moduli agree reasonably with the experimental ones.
出处 《复合材料学报》 EI CAS CSCD 北大核心 2010年第5期93-100,共8页 Acta Materiae Compositae Sinica
基金 国家自然科学基金项目(50775184 90916027 10925212) 高等学校学科创新引智计划项目(B07050)
关键词 C/C-SIC复合材料 有限元模型 尺度关联参数 应变能量法 C/C-SiC composites finite element model scale-related parameter strain energy-based method
  • 相关文献

参考文献14

  • 1Hassani B, Hinton E. A review of homogenization and topology optimization I --Homogenization theory for media with periodic structure[J]. Computers & Structures, 1998, 69(6) :707-717.
  • 2Hassani B, Hinton E. A review of homogenization and topology optimization Ⅱ--Analytical and numerical solution of homogenization equations[J]. Computers & Structures, 1998, 69(6): 719-738.
  • 3冯淼林,吴长春,孙慧玉.三维均匀化方法预测编织复合材料等效弹性模量[J].材料科学与工程,2001,19(3):34-37. 被引量:20
  • 4Peng X Q, Cao J. A dual homogenization and finite element approach for material characterization of textile composites [J]. Composites Part B, 2002, 33(1): 45-56.
  • 5Zeman J, Sejnoha M. Homogenization of balanced plain weave composites with imperfect microstructure I Theoretical formulation [J]. International Journal of Solids and Structures, 2004, 41(11):6549-6571.
  • 6许英杰,张卫红,汪海滨.多元多层平纹机织CMC-SiC弹性常数的多尺度均匀化高效预测方法[J].材料科学与工程学报,2008,26(4):526-529. 被引量:6
  • 7汪海滨,张卫红,杨军刚,许英杰,曾庆丰.考虑孔隙和微裂纹缺陷的C/C-SiC编织复合材料等效模量计算[J].复合材料学报,2008,25(3):182-189. 被引量:26
  • 8Choy K L. Chemical vapor deposition of coatings [ J ]. Progress in Materials Science, 2003, 48: 57-170.
  • 9Sun W, Lin F, Hu X. Computer aided design and modeling of composite unit cells [J]. Composites Science and Technology, 2001, 61(2): 289-299.
  • 10Tabiei A, Yi W T. Comparative study of predictive methods for woven fabric composite elastic properties [J].Composite Structures, 2002, 58(1): 149-164.

二级参考文献76

共引文献84

同被引文献42

引证文献5

二级引证文献24

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部