摘要
采用微波加热方法与常规加热方法对ZrO2增韧Al2O3(ZTA)、Y2O3稳定的四方相ZrO2(Y—TZP)进行连接试验。结果表明,利用微波加热可以顺利实现异种陶瓷之间的连接。与常规方法相比,微波加热可以快速完成连接过程,被连接陶瓷材料之间界面结合状态良好,连接强度更高。
Zirconia toughened alumina (80 wt% Al
2O 3+20 wt% ZrO 2) and tetragonal zirconia polycrystallines (doped with 2.7 mol% Y 2O 3)
were joined by using microwave and conventional heating. The experimental results show that
joining of ceramic materials with different properties by microwave could be carried out
successfully. Comparing with the conventional method, microwave joining for dissimilar
ceramic materials could be completed at a faster rate or a lower temperature with finer grain
size, better interfacial bonding and higher joint strength.
出处
《中国机械工程》
EI
CAS
CSCD
北大核心
1999年第4期464-465,475,共3页
China Mechanical Engineering
基金
国家自然科学基金
高等学校博士学科点专项基金
关键词
微波连接
ZTA
Y-TZP
陶瓷
microwave heating
conventional heating joining ZTA Y TZP