期刊文献+

果糖-邻苯二酚树脂胶粘剂的合成 被引量:1

Synthesis of fructose-pyrocatechol resin adhesive
下载PDF
导出
摘要 用果糖和邻苯二酚在碱性条件下合成了环保型果糖-邻苯二酚树脂胶粘剂。根据中心复合设计实验原理,在单项因素实验的基础上,选取4因素2水平全因子的响应面分析优化方法,以产物的黏度为指标,得到了黏度与各影响因素的回归方程以及响应曲面图和其等高线图,进而得出合成树脂胶粘剂的最佳条件:反应物配比:n(果糖):n(邻苯二酚)=2:1,反应温度为71.3℃,反应时间为7.7h,催化剂用量为4.75%。 This environmental friendly phenolic resin adhesive was prepared under the alkaline condition using fructose and pyrocatechol.The viscosity was used as an index,basing on the single factor experiment,the combined effects of temperature,time,catalyst amount and material ratio were investigated and optimized using response surface methodology (RSM).The optimum conditions of the reaction are gained: the molar ratio of fructose to pyrocatechol is 2 : 1 , the reaction temperature is 71.3 ℃, the reaction time is 7.7 h, and the catalyst amount is 4.75%.
出处 《粘接》 CAS 2010年第11期40-44,共5页 Adhesion
基金 陕西省工业科技攻关项目(项目编号:200K06-G7)
关键词 邻苯二酚 果糖 胶粘剂 响应面分析 fructose pyrocatechol adhesive response surface methodology ( RSM )
  • 相关文献

参考文献4

二级参考文献18

共引文献15

同被引文献7

  • 1Sutherland I W.Surface carbohydrates of the prokaryotic cell[M] .New York:Academic Press, 1977.
  • 2Sarabiaa L A,Ortiza M C.Response surface methodology[J]. Comprehensive Chemometrics,2009(1) :345-390.
  • 3Myers R H,Montgomery D C.Response surface methodology:Process and product optimization using designed experiments [J] .Statistical Planning and Inference, 1997,59(1):18 5-186.
  • 4Mohammed J K,Hamidi A A.Application of response surface methodology (RSM) for optimization of ammoniacal nitrogen removal from semi-aerobic landfill leachate using ion exchange resin[J] .Desalination,2010,254:154-161.
  • 5陈栓虎,王西,赵琼.果糖尿素树脂胶黏剂的合成[J].化学与粘合,2008,30(1):27-30. 被引量:8
  • 6王永贵,郭俊英,张晓露,陈栓虎.响应面优化法研究蔗糖苯酚树脂胶粘剂的合成[J].化工新型材料,2011,39(1):113-116. 被引量:12
  • 7刘宝,张长桥,郭玉梅.一锅煮法制备酚醛树脂的研究[J].山东科学,2000,13(3):49-53. 被引量:4

引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部