期刊文献+

HD469单级减速驱动中桥总成失效分析

The failure analysis on the HD469 single reduction driving front axle assembly
下载PDF
导出
摘要 汽车实际运行中零件失效的表现往往较复杂,给失效分析工作带来很大的困难。本文结合HD469单级减速驱动中桥的失效,通过对拆开的桥的各个零件,尤其是出现异常零件的观察,运用系统推理分析思想,发现安装在差壳周圈上12.9级六角头螺栓掉头断裂是导致整个469单级桥总成发生严重失效的根本原因。 The failure of the car's parts tending to be more complex in the car's actually running makes the analysis more difficult. Taking the failure of the HD469 single reduction driving front axle as example, this paper proposed the fracture of the grade 12.9 hexagon headed bolt cap which screwing down on the differential case was the primary cause of the 469 axle assembly based on the observation on those parts, especially the abnormal parts.
作者 王欢锐
出处 《汽车实用技术》 2010年第4期28-32,共5页 Automobile Applied Technology
关键词 12.9级高强度螺栓 差壳 螺栓掉头 轴承 the HD469 single reduction driving axle the grade 12.9 bolt differential case the fracture of the bolt cap.
  • 相关文献

参考文献5

二级参考文献38

  • 1Mitsuo Takashima and Zenji lida,Seinosuke Tanaka and Katsuhiro Tsukiyama, Nobuhiko lbaraki and Yuichi Namimura.Development of 1600 N/mm^2 Class Ultra-high Strength Bolts [J].SAE Paper 2003-01-1179.
  • 2Thomas J. Hughel Delayed Fracture of Class 12.8 Bolts in Automotive Rear Suspensions[J]. SAE Paper 820122.
  • 3Atsushi Murakama,Yoshitoshi Hagiwara,Masao lshida.Trend of Bolts for Use in Automobiles and Development of Class 10.9 Low Carbon Boron Steel Bolt [J].SAE Paper 970516.
  • 4黄克智,材料的损伤断裂机理和宏微观力学理论,1999年,196页
  • 5乔利杰,应力腐蚀机理,1993年,92页
  • 6Lin T L,Metal Trans.A,1988年,19卷,9期,2225页
  • 7褚武扬,氢损伤和滞后断裂,1988年,472页
  • 8長谷川豊文 加藤猛彦.ねじ材料の勤向—炭素鋼@合金鋼[J].特殊鋼,1991,40(2):12-15.
  • 9原好敏.自勤車用ボルト@ねじ[J].特殊鋼,1995,44(12):7-10.
  • 10志贺則夫.ワイヤ—メ—力—の勤向[J].特殊鋼,1999,48(2):16-18.

共引文献71

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部