期刊文献+

Electrochemical properties of spinel compound LiNi_(0.5)Mn_(1.2)Ti_(0.3)O_4 as cathode materials for lithium ion batteries 被引量:1

Electrochemical properties of spinel compound LiNi_(0.5)Mn_(1.2)Ti_(0.3)O_4 as cathode materials for lithium ion batteries
下载PDF
导出
摘要 The electrochemical properties of spinel compound LiNi0.5Mn1.2Ti0.3O4 were investigated in this study.The chemicals LiAc·2H2O,Mn(Ac)2·2H2O,Ni(Ac)2·4H2O,and Ti(OCH3)4 were used to synthesize LiNi0.5Mn1.2Ti0.3O4 by a simple sol-gel method.The discharge capacity of the sample reached 134 mAh/g at a current rate of 0.1C.The first and fifth cycle voltammogram almost overlapped,which showed that the prepared sample LiNi0.5Mn1.2Ti0.3O4 had excellent good cycle performance.There were two oxidation peaks at 4.21 V and 4.86 V,and two reduction peaks at 4.55 V and 3.88 V in the cycle voltammogram,respectively.By electrochemical impedance spectroscopy and its fitted result,the lithium ion diffusion coefficient was measured to be approximately 7.76 × 10?11 cm2/s. The electrochemical properties of spinel compound LiNi0.5Mn1.2Ti0.3O4 were investigated in this study.The chemicals LiAc·2H2O,Mn(Ac)2·2H2O,Ni(Ac)2·4H2O,and Ti(OCH3)4 were used to synthesize LiNi0.5Mn1.2Ti0.3O4 by a simple sol-gel method.The discharge capacity of the sample reached 134 mAh/g at a current rate of 0.1C.The first and fifth cycle voltammogram almost overlapped,which showed that the prepared sample LiNi0.5Mn1.2Ti0.3O4 had excellent good cycle performance.There were two oxidation peaks at 4.21 V and 4.86 V,and two reduction peaks at 4.55 V and 3.88 V in the cycle voltammogram,respectively.By electrochemical impedance spectroscopy and its fitted result,the lithium ion diffusion coefficient was measured to be approximately 7.76 × 10?11 cm2/s.
出处 《Rare Metals》 SCIE EI CAS CSCD 2010年第6期572-575,共4页 稀有金属(英文版)
关键词 lithium batteries cathode materials sol-gel process electrochemical properties lithium batteries cathode materials sol-gel process electrochemical properties
  • 相关文献

参考文献12

  • 1Xiao L.F., Zhao Y.Q., and Yang Y.Y., Electrochemical properties of nano-crystalline LiNi0.5Mn1.5O4 synthesized by polymer-pyrolysis method, J Solid State Electrochem., 2008, 12: 687.
  • 2Amine K., Tukamoto H., Yasuda H., Fujita Y., A new three-volt spinel Li1+xMnl.sNi0.5O4 for secondary lithium batteries, J. Electrochem. Soc., 1996, 143: 1607.
  • 3Oh S.H., Chung K.Y., Jeon S.H., Kim C.S., Cho W., and Cho B.W., Structural and electrochemical investigations on the LiNi0.5 xMn1.5_yMx+yO4 (M = Cr, Al, Zr) compound for 5 V cathode material, J. Alloys Compd., 2009, 469: 244.
  • 4Oh S.Y., Jeon S.H., Cho W.I., Kim C.S., and Cho B.W., Synthesis and characterization of the metal-doped high-voltage spinel LiNi0.5Mn1.5O4 by mechanochemical process, J. Alloys Compd., 2008, 452: 389.
  • 5Du G.D., Li Y.N., Yang J., and Wang J.L., Fluorine-doped LiNi0.5Mn1.5O4 for 5 V cathode materials of lithium-ion battery, Mater. Res. Bull., 2008, 43: 3607.
  • 6Fu L.J., Liu H., Li C., Wu Y.P., Rahm E., Holze R., and Wu H.Q., Electrode materials for lithium secondary batteries prepared by sol-gel methods, Prog. Mater. Sci., 2005, 50:881.
  • 7Wu Y.P., Rahm E., and Holze R., Effects of heteroatoms on electrochemical performance of electrode materials for lithium ion batteries, Electrochim. Acta, 2002, 47: 3491.
  • 8Kim J.H., Myung S.T., Yoon C.S., Oh I.H., and Sun Y.K., Effect of Ti substitution for Mn on the structure of LiNi0.5Mn1.5-xTixO4 and their electrochemical properties as lithium insertion material, J. Electrochem. Soc., 2004, 151: A1911.
  • 9Fang H.S., Wang Z.X., Li X.H., Guo H.J., and Peng W.J., Exploration of high capacity LiNi0.5Mn1.5O4 synthesized by solid-state reaction, J. Power Sources, 2006, 153:174.
  • 10Wei Y.J., Kim K.B., and Chen G., Evolution of the local structure and electrochemical properties of spinel LiNixMn2-xO4 (0 <x < 0.5), Electrochim. Acta, 2006, 51: 3365.

引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部