期刊文献+

全麻卷烟纸的生产工艺初探 被引量:3

Manufacture of Cigarette Paper with Flax Pulp
下载PDF
导出
摘要 对生产全麻卷烟纸中出现的孔眼、断头、透气度过高、浆料絮聚和滤水性差等问题进行了初步探讨,同时对长短麻浆纤维的配比、浆中填料用量以及浆料的上网浓度进行了研究。结果表明,当长纤维麻浆配比在40%时,全麻卷烟纸纸面平整,性能较好;填料用量在20%~30%时,既可节约生产成本,又可得到透气度、不透明度和白度较好的成纸;浆料上网浓度控制在0.45%~0.55%之间,可得到纸面细腻、罗纹清晰、卷烟包灰好的全麻卷烟纸,同时还可以改善成纸匀度。 In this paper,research work was carried out in order to produce cigarette paper with flax pulp.The flax pulp fiber was classified to long and short fibers.It was found that when the content of long fiber flax pulp accounted for 40%in the furnish,good paper formation could be obtained.When 20%~30%filler was added,better permeability,opacity and whiteness could be obtained.The smoothness of the cigarette paper was improved when concentration of flax pulp in the headbox was 0.45%~0.55%.
出处 《中国造纸》 CAS 北大核心 2010年第11期5-8,共4页 China Pulp & Paper
基金 国家自然科学基金(30901140 30871996) 山东大学微生物技术国家重点实验室开放基金项目(M2010-01) 山东省"泰山学者"建设工程资助项目 制浆造纸科学与技术省部共建教育部重点实验室(山东轻工业学院)开放基金(0806) 山东轻工业学院博士启动基金(12042920)的资助
关键词 麻浆 卷烟纸 填料 上网浓度 flax pulp cigarette paper filler concentration of the pulp entering onto the wire
  • 相关文献

参考文献11

二级参考文献10

共引文献109

同被引文献30

引证文献3

二级引证文献11

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部