期刊文献+

自保温混凝土砌块砌体抗压及抗剪性能试验研究 被引量:10

Experimental research on compressive and shear performance of composite thermal insulation concrete block masonry
下载PDF
导出
摘要 自保温混凝土空心砌块是一种新型的节能砌块,主要应用于框架结构的填充墙。为研究非承重自保温混凝土空心砌块砌体的基本力学性能,探讨了3种不同砌筑砂浆强度下自保温混凝土空心砌块砌体的抗压强度和抗剪强度。结果表明,自保温混凝土砌块砌体的受压过程类似于一般混凝土空心砌块,只是裂缝出现的部位不同;自保温混凝土砌块砌体的抗剪强度主要取决于砌筑砂浆强度,并随着砌筑砂浆强度的增大而增大。 The composite thermal insulation concrete block masonry,as a type of new thermal insulation masonry,is mainly applicable for infill wall of frame structure. In order to study its basic physical performances, the compressive strength and shear strength of this masonry under three different mortar strengths were carried out. The results show that the process of compression is similar with the normal concrete block masonry,only the position of the crack is different. The shear strength is depended on the mortar strength,and the shear strength is increased with the increasing of the mortar strength.
出处 《新型建筑材料》 北大核心 2010年第11期25-28,共4页 New Building Materials
基金 江苏省建筑业科研项目(JGJH2008-22)
关键词 自保温混凝土空心砌块 砌体 抗压强度 抗剪强度 非承重墙体 composite thermal insulation concrete block masonry compressive strength shear strength self-supporting wall
  • 相关文献

参考文献4

二级参考文献10

  • 1施楚贤 主编.砌体结构理论与设计[M].中国建筑工业出版社,1992..
  • 2GB50003-2001砌体结构设计规范[S].北京:中国建筑工业出版社,2002.
  • 3夏热冬冷地区居住建筑节能设计标准(JGJ134--2001)[S].北京:中国建筑工业出版社,2001.
  • 4江苏省民用建筑热环境与节能设计标准(DB32/478--2001)[S].2001.
  • 5砌体基本力学性能试验方法标准(GBJ129—90)[S].北京:中国建筑工业出版社,1997.
  • 6混凝土空心砌块试验方法(GB/T4111—1997)[S].北京:中国建筑工业出版社,1997.
  • 7砌体结构设计规范(GB50003--2001)[S].北京:中国建筑工业出版社,2002.
  • 8GBJ129-90砌体基本力学性能试验方法标准[S].北京:中国建筑工业出版社,1997.
  • 9GB/T4111-1997混凝土空心砌块试验方法[S].北京:中国建筑工业出版社,1997.
  • 10叶燕华,孙伟民,何嘉鹏,缪汉良.混凝土空心砌块墙体热绝缘系数理论分析[J].新型建筑材料,2002,29(5):27-29. 被引量:26

共引文献49

同被引文献41

引证文献10

二级引证文献14

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部