期刊文献+

多路可控可监测稳压电源的设计 被引量:5

Design of Monitorable and Controllable of Multiple Power Supply
下载PDF
导出
摘要 该文设计了一种电压、电流值可实时监测的多路可控线性稳压电源,可将霍尔传感器所监测的电压电流值通过USB接口实时显示到上位机软件界面,且可根据所监测的电流值的大小与预先设定的值进行比较,如果超出设定值可控制该路断开,实现过流保护。根据要求该电源可由上位机软件控制将某一路输出进行10%拉偏,该电源输出稳定、性能可靠、已成功用于某存储系统测试设备。 This paper designs a voltage and current values can be controlled real-time monitoring of multiple linear regu-lated power supply,the voltage and current values collected by Hall sensors can be real-timed display to the PC soft-ware interface through the USB interface,and the collected current value can be compared with that of pre-set value,if it exceed the pre-set value,it can be controlled off this circuit,achieve over-current protection.On request,the power supply can be controlled to a host computer software output to 10% of the pull side,this power output stablity,reliable performance,has been successfully apply on a test equipment for a storage systems.
出处 《自动化与仪表》 北大核心 2010年第11期49-51,55,共4页 Automation & Instrumentation
基金 国家自然科学基金资助项目(50535030)
关键词 多路 实时监测 可控 稳压电源 multiple real-time monitoring controllable power supply
  • 相关文献

参考文献3

  • 1Redl R.A novel soft switching full-bridge DC/DC converter:analysis,design consideration,at 1.5kW,100kHz[C]//IEEE Trans on Power Electronics,1991,6(3):408-418.
  • 2王韬,卢畅.数控直流电源的一种实现方法[J].台州学院学报,2005,27(6):39-42. 被引量:8
  • 3Xinbo Ruan,Fuxin Liu.An improved ZVS PWM full-bridge converter with clamping diodes[C]//Power Electronics Specialists Conference,2004(2):1476-1481.

共引文献7

同被引文献22

引证文献5

二级引证文献5

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部