摘要
将衍射面和塑料非球面元件引入到传统的Petzval型球面系统中,设计了含有1个衍射面和1个塑料非球面元件的5片单管双目式微光夜视物镜,并分析了塑料元件的热效应影响,计算了衍射面的加工工艺参数。该物镜具有长焦距、大相对孔径、小畸变的特点;在物距L=∞和L=10 m、空间频率为40 lp/mm时,轴上传递函数≥0.70,轴外传递函数≥0.50,全视场畸变≤0.40%;光学总长由传统物镜系统的128 mm缩短为110 mm,重量仅为190 g,减少为传统物镜的62.5%,适用于夜间瞄准与测量。
The diffractive surfaces and plastic aspherical elements conventional Petzval spherical system. A five-element objective of are introduced into the design of single tube binocular containing a diffractive surface and a plastic asperical surface is designed. The thermal effects of the plastic elements are analyzed. The manufacturing parameters of the diffractive surface are calculated. The objective has a long focal length, large relative aperture, small distortion. When the object distance is infinity or 10m, and the spatial frequency is 40 lp/mm, the on-axis MTF is not less than 0.70 and off-axis MTF is not less than 0.50. The distortion of TFOV is less than 0.40%. Compared with a conventional spherical objective with equivalent performance, the total track of the optical system reduces from 128 mm to 110 ram, and the weight reduces to 62.5% of the conventional objective, i.e. 190 g. This objective is suitable for accurately measuring and aiming during nighttime.
出处
《红外技术》
CSCD
北大核心
2010年第11期666-671,共6页
Infrared Technology
基金
基础预研项目(编号:B2220061084)
关键词
微光夜视仪
光学设计
衍射面
塑料非球面
low-light-level night vision, optical design, hybrid refractive-diffractive system, aspherical plastic surfaces