摘要
在高速钻削猪胫骨过程中,钻削力和钻削温度对改进医疗钻头的设计是非常重要的。研究结果表明:在钻削骨头的过程中,钻削力和钻削温度受进给速度和钻削速度的影响。相比不锈钢麻花钻,带三个切削刃的新型医疗钻头能够取得更小的钻削力和低于47℃的钻削温度。
Drilling force and temperature of tibia at the high speed drilling for improving the design of surgical drills are very important.The result shows that the drilling force and temperature are affected by the feed rate and drilling speed,which vary with the drilling depth into the bone.The new surgical drill with three top cutting edges can achieve lower temperature below 47℃ and lower drilling force than with the stainless steel twist drill.
出处
《机械设计与制造》
北大核心
2010年第11期118-120,共3页
Machinery Design & Manufacture
基金
番禺区科技支撑计划项目(2009-7)
关键词
骨头钻削
钻削力
钻削温度
医疗钻头
Bone drilling
Drilling force
Drilling temperature
Surgical drill
