CAD/CAM全瓷固定修复体适合性研究进展
被引量:6
出处
《现代口腔医学杂志》
CAS
CSCD
2010年第6期464-466,共3页
Journal of Modern Stomatology
基金
国家科技支撑计划项目(2009BAI8IB02)
参考文献22
-
1李明哲,三浦宏之,进千春,山崎有子,宫坂宗永.隙料厚度和覆盖面积对Cercon CAD/CAM底层冠适合性的影响[J].华西口腔医学杂志,2009,27(2):195-198. 被引量:7
-
2翁维民,李莹,张富强.牙体制备形态对Cerec全瓷冠边缘适合性的影响分析[J].上海口腔医学,2008,17(3):293-296. 被引量:35
-
3李蓉,蒋滔,王贻宁,李四群,程祥荣.烤瓷贴面和计算机辅助设计与计算机辅助制作瓷贴面的应用效果比较[J].中华口腔医学杂志,2007,42(6):330-332. 被引量:8
-
4Seo D,Yi Y,Roh B.The effect of preparation designs on themarginal and internal gaps in Cerec3 partial ceramic crowns. JDent . 2009
-
5Vigolo P,Fonzi F.An in vitro evaluation of fit of zirconium-oxide-based ceramic four-unit fixed partial dentures generated withthree different CAD/CAMsystems before and after porcelain firingcycles and after glaze cycles. Journal of Prosthodontics . 2008
-
6Lee KB,Park CW,Kim KHet al.Marginal and internal fit of all-ceramic crowns fabricated with two different CAD/CAMSystems. Dental Materials Journal . 2008
-
7Monticelli F,Toledano M,Osorio Ret al.Influence of CAM vs.CAD/CAMscanning methods and finish line of tooth preparation inthe vertical misfit of zirconia bridge structures. The Journal of The American Dental Association . 2009
-
8Att W,,Komine F,Gerds T,et al.Marginal adaptation of three different zirconium dioxide three-unit fixed dental prostheses. The Journal of ProsThetic Dentistry . 2009
-
9Reiss B.Clinial results of CEREC inlays in a dental practice over a period of 18 years. International Journal of Computerized Dentistry . 2006
-
10SH Mou,T Chai,JS Wang,YY Shiau.Influence of different convergence angles and tooth preparation heights on the internal adaptation of Cerec crowns. The Journal of ProsThetic Dentistry . 2002
二级参考文献47
-
1Richard D. Stutes.椅旁CAD/CAN牙科修复系统的历史与临床应用现状(英文)[J].上海口腔医学,2006,15(5):449-455. 被引量:27
-
2Aboushelib MN, de Jager N, Kleverlaan CJ, et al. Microtensile bond strength of different components of core veneered all-ceramie restoratlons[J]. Dent Mater, 2005, 21 (10):984-991.
-
3Reich S, Wichmann M, Nkenke E, et al. Clinical fit of all-ceramic three-unit fixed partial dentures, generated with three different CAD/CAM systems[J]. Eur J Oral Sci, 2005, 113(2):174- 179.
-
4Suttor D. Lava zirconia crowns and bridges[J]. Int J Comput Dent, 2004, 7(1):67-76.
-
5Komine F, Gerds T, Witkowski S, et al. Influence of framework configuration on the marginal adaptation of zirconium dioxide ceramic anterior four-unit frameworks[J]. Acta Odontol Scand, 2005, 63 (6) : 361-366.
-
6Nakamura T, Dei N, Kojima T, et al. Marginal and internal fit of Cerec 3 CAD/CAM all-ceramic crowns[J]. Int J Prosthodont, 2003, 16 (3) : 244-248.
-
7Albert FE, E1-Mowafy OM. Marginal adaptation and microleakage of Procera All Ceram crowns with four cements [J]. Int J Prosthodonl, 2004, 17 (5) : 529-535.
-
8Miura S, Inagaki R, Konno T, et al. A basic study on the tetragonal zirconia polycrystal-fitness of the crown[J]. J Esthet Dent, 2004, 16(2) : 260-265.
-
9Yara A, Goto S, Ogura H. Correlation between accuracy of crowns fabricated using CAD/CAM and elastic deformation of CAD/CAM materials[J]. Dent Mater J, 2004, 23 (4): 572-576.
-
10Bindl A, Mormann WH. Marginal and internal fit of all-ceramic CAD/CAM crown-copings on chamfer preparations[J]. J Oral Rehabil, 2005, 32(6) :441-447.
共引文献45
-
1龙红月.氧化锆全瓷冠修复的临床应用研究[J].中国美容医学,2008,17(11):1656-1658. 被引量:25
-
2邱宏亮.CAD/CAM氧化锆全瓷冠修复对牙周健康状况影响的临床研究[J].中国医疗前沿,2009,4(23):71-72. 被引量:6
-
3葛登峰,邱宏亮.CAD/CAM氧化锆全瓷冠联合玻璃纤维桩的临床应用研究[J].口腔医学,2010,30(4):213-216. 被引量:7
-
4吕卉.氧化锆全瓷修复后1年的牙周状况分析[J].中国实用口腔科杂志,2010,3(6):367-368. 被引量:10
-
5丁伟山,黄爱玲,胡以俊,蒋芸卉,王铎.CAD/CAM氧化锆底层冠适合性的实验研究[J].口腔颌面修复学杂志,2010,11(3):144-146. 被引量:9
-
6丁伟山,胡以俊,王铎.氧化锆全瓷修复体抗折强度的影响因素[J].上海口腔医学,2010,19(5):553-557. 被引量:5
-
7高倩,李彦秋,王德波.不同厚度普玛黏结剂对冠固位力的影响[J].天津医药,2011,39(6):533-535.
-
8余顺兰,关雪琳.Cerec椅旁操作系统临床失败率分析[J].口腔颌面修复学杂志,2011,12(2):123-125. 被引量:6
-
9高飞,张建强,李岩峰,孙鹏,刘斌.玻璃纤维桩与氧化锆全瓷冠修复前牙50例分析[J].人民军医,2011,54(7):618-619. 被引量:2
-
10彭利辉,钟爱喜,潘小波,刘光雪,李荣婷.后牙氧化锆全瓷桥的临床应用分析[J].中国美容医学,2011,20(11):1785-1786. 被引量:1
同被引文献53
-
1顾新华,郦芳,黄建萍.不同粘固剂对全冠修复体边缘适合性的影响[J].浙江医学,2006,28(2):98-99. 被引量:4
-
2Okuda Y, Noda M, Kono H, et al. Radio--opacity of core materials for all--ceramic restorations [J]. Dent Mater J, 2010, 29(1) : 35-40.
-
3Pak HS, Han JS, Lee JB, et al. Influence of porcelain ve- neering on the marginal fit of Digident and Lava CAD/CAM zirconia ceramic crowns[J]. J Adv Prosthodont, 2010, 2(2) : 33-38.
-
4AI- Dohan HM, Yaman P, Dennison JB, et al. Shear strength of core- veneer interface in bi- layered ceramics [J]. J Prosthet Dent, 2004, 91(4) : 349-355.
-
5Shijo Y, Shinya A, Gomi H, et al. Studies on mechanical strength, thermal expansion of layering porcelains to alumina and zirconia ceramic core materials [J].Dent Mater J, 2009, 28(3) : 352-361.
-
6Anusavice KJ, Ringle RD, Fairhurst CW. Adherence con- trolling elements in ceramic-- metal systems. II. Nonprecious alloys[J]. J DentRes, 1977, 56(9) : 1053-1061.
-
7Christensen GJ. Porcelain-- fused-- to-- metal versus zirconia --based ceramic restorations, 2009 [J]. J Am Dent Assoc, 2009, 140(8) :1036-1039.
-
8Guazzato M, Quach L, Albakry M, et al. Influence of sur- face and heat treatments on the flexural strength of Y--TZP dental ceramic[J]. J Dent, 2005, 33(1) :9-18.
-
9Albakry M, Guazzato M, Swain MV. Biaxial flexural strength and microstructure changes of two recycled pressable glass ceramics [J]. J Prosthodont, 2004,13(3) : 141-149.
-
10Anusavice K J, Dehoff P H, Fairhurst C W. Comparative e- valuation of ceramic-- metal bond tests using finite element stress analysis[J]. J DentRes, 1980, 59(3) : 608-613.
引证文献6
-
1韩会芳,逯宜,牛林.CEREC 3D椅旁CAD/CAM全瓷修复体的护理配合[J].中国美容医学,2011,20(6):1009-1011. 被引量:13
-
2杨光,袁柱炫,李蓉.氧化锆底瓷与饰瓷结合力的实验评估[J].口腔医学研究,2011,27(6):471-475. 被引量:9
-
3陈志宇,李雅,陈倩,邓旭亮,王新知.基于印模扫描数据CAD/CAM一体化纤维桩核的密合度观察[J].北京口腔医学,2013,21(4):196-199. 被引量:5
-
4钟春梅,袁柱炫,熊伟.cerec 3 CAD/CAM椅旁系统在前牙修复中的护理配合研究[J].国际医药卫生导报,2013,19(22):3399-3402.
-
5林燕,周薇娜.四手操作护理在椅旁CAD/CAM全瓷修复体制作中的应用[J].江苏医药,2015,41(13):1606-1607. 被引量:9
-
6罗丽红,陈炜,吴绍程.椅旁CEREC3D CAD/CAM在临床全瓷修复体治疗中的应用效果[J].实用临床医学(江西),2016,17(1):44-46. 被引量:2
二级引证文献38
-
1崔小凡,刘雪,徐晓旭.精细化护理在CEREC椅旁系统中的应用[J].医疗装备,2020,0(3):156-158.
-
2张红,殷新民,聂蓉蓉,钱海蓝.IPS e.max Press全瓷修复材料在后牙全冠修复中的临床应用[J].南京医科大学学报(自然科学版),2012,32(12):1758-1760. 被引量:3
-
3许琼莉,贺维,许明莲,徐佳瑛.CEREC AC及MC XL椅旁CAD/CAM全瓷修复的护理配合[J].临床口腔医学杂志,2013,29(7):433-434. 被引量:3
-
4陈宇晖,施生根,党平,史亮,师天鹏,李丹.锆瓷基底表面形貌对锆瓷饰瓷间结合强度影响的研究[J].口腔颌面修复学杂志,2013,14(4):235-238. 被引量:2
-
5钟春梅,袁柱炫,熊伟.cerec 3 CAD/CAM椅旁系统在前牙修复中的护理配合研究[J].国际医药卫生导报,2013,19(22):3399-3402.
-
6赵君娜,王铁军,杨柳,于明红.CEREC 椅旁 CAD-CAM 技术修复牙体缺损的护理配合[J].中华现代护理杂志,2014,20(3):326-327. 被引量:3
-
7陈宇晖,施生根,党平,闫澍,师苏萌,李丹.饰瓷与氧化锆陶瓷基底预烧结对饰瓷锆瓷结合强度的影响[J].口腔颌面修复学杂志,2014,15(6):355-359. 被引量:7
-
8高菊荣,王艳开,王慧媛,晁洋.Cerec全瓷修复技术中的护理措施[J].西北国防医学杂志,2014,35(6):587-588. 被引量:1
-
9刘敏.CEREC全瓷嵌体修复治疗的临床护理[J].山西职工医学院学报,2014,24(6):67-68. 被引量:1
-
10乔文静,李君.CEREC AC Omnicam椅旁CAD/CAM系统在后牙嵌体修复中的护理体会[J].中国医疗美容,2015,5(1):157-158. 被引量:2
-
1马洪学,刘延考,许美莲.隐形瓷的临床效果观察[J].口腔颌面修复学杂志,2002,3(1):53-54.
-
2钱海燕,张建兴.口腔固定正畸矫治中牙釉质脱矿护理体会[J].齐鲁护理杂志,2007,13(18):60-60. 被引量:1
-
3李萍.氟化泡沫在正畸治疗中的防龋效果分析[J].亚太传统医药,2011,7(3):105-106. 被引量:1
-
4郑庄,唐亮.粘接材料与口腔固定修复的微渗漏(讲座)[J].暨南大学学报(自然科学与医学版),2003,24(4):111-114. 被引量:13
-
5卫东.镍钛螺簧在口腔固定正崎中的应用[J].中国煤炭工业医学杂志,1998,1(2):123-124.
-
6刘相荣.独一味胶囊治疗口腔固定正畸患者慢性牙龈炎的疗效观察[J].现代实用医学,2014,26(8):1031-1033. 被引量:1
-
7刘湘涛.氟缓释釉质粘结剂的评价[J].杭州医学高等专科学校学报,2002,23(4):169-171.
-
8邵金陵,董瑞华,蒋勇,何艳,韩迎星.影响托槽脱落的相关因素研究(一)[J].临床口腔医学杂志,2005,21(8):491-493. 被引量:6
-
9董煜,单莉英.临时冠桥材料“速宁”在口腔固定修复中的临床应用[J].邯郸医学高等专科学校学报,2006,19(4):359-360.
-
10胡荣丽,赵文花,谢玲勤,寸建芳.口腔保健在固定矫正器治疗中的临床作用[J].医学信息,2011,24(6):1499-1499.