期刊文献+

无缝桥加筋接线路面的拉伸变形性能 被引量:5

Tensile Deformation Performance of Reinforced Approach Pavement of Jointless Bridge
原文传递
导出
摘要 为减小接线路面中裂缝的离散性,在无缝桥加筋接线路面中引入等距离的预压缝,并设计了室内节段模型温降模拟试验,同时根据混凝土粘结-滑移理论推导了无缝桥加筋接线路面在纵向荷载作用下裂缝宽度的计算公式,并对试验观测值与理论计算值进行了对比。结果表明:裂缝宽度的理论值与试验值能较好吻合,初步验证了加筋接线路面的裂缝能呈规律性地发展,而且接线路面有良好的吸收变形性能,为无缝桥中带预压缝的加筋接线路面的设计提供了依据。 In order to eliminate the randomness of cracks,equidistant pre-compaction seams were introduced into reinforced approach pavement of jointless bridge.Then a scale model test was conducted.In the model,mechanical behavior of the reinforced approach pavement suffered from temperature falling was simulated.At the same time,based on concrete bonding-sliding theory,calculated formulas of crack width for the reinforced approach pavement under longitudinal loads were derived.Comparisons between the scale model test results and the results given by the derived formulas show that the two kinds of results agree well with each other.It means that the cracks can develop well under certain principle,meanwhile,the reinforced approach pavement can absorb deformation effectively.Hence,the derived formulas can be applied to the process of the design of reinforced approach pavement implanted with pre-compaction seams in jointless bridges.
出处 《中国公路学报》 EI CAS CSCD 北大核心 2010年第6期34-40,共7页 China Journal of Highway and Transport
基金 国家西部交通建设科技项目(2009318000044) 教育部高等学校博士学科点专项科研基金项目(20040532018)
关键词 桥梁工程 无缝桥 试验研究 加筋接线路面 预压缝 摩阻力 裂缝宽度 bridge engineering jointless bridge experimental research reinforced approach pavement pre-compaction seam frictional force crack width
  • 相关文献

参考文献5

二级参考文献2

共引文献3015

同被引文献35

  • 1金晓勤,邵旭东,陈华辉,林辉.整体式无缝桥梁新技术初步试验研究[J].湖南大学学报(自然科学版),2006,33(4):1-5. 被引量:7
  • 2JTGD63-2007公路桥涵地基与基础设计规范[S].北京:人民交通出版社,2007.
  • 3JTGD40-2011,公路水泥混凝土路面设计规范[S].
  • 4JTGD62-2004公路钢筋混凝土及预应力混凝土桥涵设计规范[S],北京:人民交通出版社,2004.
  • 5JTGD40-2002公路水泥混凝土路面设计规范[S].北京:人民交通出版社,2003.
  • 6Arockiasamy M, Butrieng N, Sivakumar M. State of the art of integral abutment bridge: design and practice [J]. Journal of Bridge Engineering, 2004,9 (5) :497 - 506.
  • 7White H II, Petursson H, Collin P. Intergral abutment bridges: the European way [ J ]. Practice Periodical on Structural Design and Construction, 2010,15 (3) :201 - 207.
  • 8Jin Xiaoqin, Shao Xudong, Yan Banfu, et al. New technologies in China's first jointless integral-abutment bridge[C]. IABSE Symposium on Metropolitan Habitats and Intrastructure. Shanghai, 2004.
  • 9Jin Xiaoqin, Shao Xudong, Peng Wanghu, et al. A new category of semi-integral abutment in China [J]. Structural Engineering International, 2005,15 ( 3 ) : 186 - 188.
  • 10JT/T4-2004公路桥梁板式橡胶支座[S].北京:电子工业出版社,2004.

引证文献5

二级引证文献10

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部