期刊文献+

Backlash analysis of a new planetary gearing with internal gear ring 被引量:1

Backlash analysis of a new planetary gearing with internal gear ring
下载PDF
导出
摘要 Due to low carrying capacity and short life of current ring reducer,we proposed a new planetary gearing with internal gear ring,which consisted of two stages.One was an involute planetary drive and the other was an N-type planetary drive with small teeth difference.The kinematic calculation was conducted based on the analysis of structural composition and working principle.Formulas of backlash calculation for the new planetary gearing were derived by using probabilistic theory and the analytical model was created at the same time.Then,main factors that affect the systematic backlash were introduced and the effects of manufacture error,misaligments and roller bearing parameters on the distribution of backlash were presented.The influence of gear backlash on systematic return difference was performed based on the backlash mathematic model proposed.The results show that the backlash is a little large,of which the backlash of bearing takes a greater part than two gearing stages.So we presented some practical methods to reduce the systematic backlash. Due to low carrying capacity and short life of current ring reducer, we proposed a new planetary gearing with internal gear ring, which consisted of two stages. One was an involute planetary drive and the other was an N-type planetary drive with small teeth difference. The kinematic calculation was conducted based on the analysis of structural composition and working principle. Formulas of backlash calculation for the new planetary gearing were derived by using probabilistic theory and the analytical model was created at the same time. Then, main factors that affect the systematic backlash were introduced and the effects of manufacture error, misaligments and roller bearing parameters on the distribution of backlash were presented. The influence of gear backlash on systematic return difference was performed based on the backlash mathematic model proposed. The results show that the backlash is a little large, of which the backlash of bearing takes a greater part than two gearing stages. So we presented some practical methods to reduce the systematic backlash.
作者 朱才朝 肖宁
出处 《Journal of Chongqing University》 CAS 2010年第3期151-158,共8页 重庆大学学报(英文版)
基金 Funded by Key Technology R&D Program of Chongqing(No. 2008AC3087) Science & Technology Project of Chongqing Education Committee(No. KJ091414)
关键词 与内部齿轮戒指的行星的传动 概率的理论 回来差别 传动反斜线 planetary gearing with intemal gear ring probabilistic theory return difference gear backlash
  • 相关文献

参考文献15

二级参考文献18

共引文献62

同被引文献22

  • 1李传兵.混合少齿差星轮减速器星轮轴承寿命计算[J].安徽工业大学学报(自然科学版),2005,22(2):156-158. 被引量:3
  • 2周干绪,龙爱华.混合少齿差星轮减速器和变速器的研究[J].中国机械工程,1993,4(2):44-46. 被引量:3
  • 3梁永生,李华敏,李瑰贤.Theoretical calculation and experimental study on the load distribution coefficient (LDC) of three-ring gear reducer[J].Journal of Harbin Institute of Technology(New Series),2006,13(6):748-752. 被引量:1
  • 4周干绪.一种新结构的星轮减速器和变速器:中国.96118189.3[P].1997-12-3.
  • 5周干绪.多功能星轮减速器:中国.98112433.x[P].1999-10-20.
  • 6周干绪.混合少齿差星轮减速器和变速器:中国.88105740.1[P].1990-01-24.
  • 7Zhou Ganxu. Planetary transmission mechanism and device of involute gears with complex minor tooth difference: United States.4896567[P]. Jan.30, 1990.
  • 8Huang Chao, Wang Jiaxu, Xiao Ke, et al. Dynamic characteristics analysis and experimental research on a new type planetary gear apparatus with small tooth number difference[J]. Journal of Mechanical Science and Technology, 2013, 27(5): 1233- 1244.
  • 9Guo Y, Parker R G. Dynamic modeling and analysis of a spur planetary gear involving tooth wedging and bearing clearance nonlinearity[J]. Eur. J. Mech. A-Solid., 2010, 29(6): 1022- 1033.
  • 10Yang Jianming, Zhang Ce. Elasto-dynamics of internal gear planetary transmissions[J]. Mechanism and Machine Theory, 40 (2005): 1107-1125.

引证文献1

二级引证文献6

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部