摘要
介绍了在金属基片上激光沉积缓冲层和YBa2Cu3O7-x(YBCO)高温超导薄膜的研究结果。在带ytria-stabilized-zirconia(YSZ)缓冲层的NiCr合金基片上,激光原位沉积出YBCO超导薄膜,薄膜的零电阻转变温度为84K,77K时临界电流密度约为2000A/cm2;缓冲层的取向可以通过选择适当的沉积参数来改善;
YBa 2Cu 3O 7-x (YBCO) superconducting thin
films with T c (R=0) of 84 K and J c of 2×10 3 A/cm 2 at 77 K, on
polycrystalline Ni based alloys with buffer layers of yttria stabilized zirconia (YSZ), are
prepared in situ by excimer laser and primarily c axis oriented. The orientation of laser
deposited YSZ buffer layers on NiCr alloys can be improved by choosing the suitable
preparing parameters. The microstructure of the YBCO thin films, investigated with a scanning
tunneling microscopy, shows that the spiral growth structure may be an important characteristic
of the high quality YBCO superconducting thin films.
出处
《光学学报》
EI
CAS
CSCD
北大核心
1999年第5期647-650,共4页
Acta Optica Sinica
基金
国家自然科学基金
关键词
激光沉积
超导薄膜
金属基片
缓冲层
YBCO
laser deposition, YBCO film,
metallic substrates, spiral growth structure, buffer layer.