期刊文献+

窗式空调器平行流冷凝器流程和扁管的优化分析 被引量:4

Optimization on pass design and plat tube arrangement of parallel-flow type condensers for window type air conditioners
下载PDF
导出
摘要 选择百叶窗肋片及小通道内流体传热流动的经验关联式,采用效能-传热单元数法建立了平行流冷凝器的稳态仿真模型。对不同流程数和扁管数方案的冷凝热和制冷剂压降进行了模拟分析,得出了扁管总数为39时的优化方案。 Establishes a steady simulation model of the condenser by empirical correlation of flow and heat transfer performance of louver fin and fluid in mini-channel tube and ε-NTU method.Performs the simulation and analysis of condensing heat and refrigerant pressure drop for the schemes with different number of passes and tubes and obtains the optimal scheme for the total tube number of 39.
出处 《暖通空调》 北大核心 2010年第12期98-102,共5页 Heating Ventilating & Air Conditioning
基金 广东省教育部产学研结合项目(编号:2007A090302115) 粤港关键领域重点突破项目(佛山专项)(编号:2007Z41) 华中科技大学能源与动力工程学院科学研究基金(编号:NK200706)
关键词 流程数 扁管数 平行流冷凝器 窗式空调 pass number plat tube number parallel flow type condenser window type air conditioner
  • 相关文献

参考文献10

  • 1Chung K,Lee K S,Kim W S.Optimization of the design factors for thermal performance of a parallel-flow heat exchanger[J].International Journal of Heat and Mass Transfer,2002,45(24):4773-4780.
  • 2Bullard Clark W,Practor John,Brezner Joseph,et al.Modeling and testing of a utility peak reducing residential hot/dry air conditioner(HDAC)using microchannel heat exchangers[G] //ASHRAE Trans,2006,112(2):162-170.
  • 3Park C Y,Hrnjak P.Experimental and numerical study on microchannel and round-tube condensers in a R410A residential air-conditioning system[J].International Journal of Refrigeration,2008,31(5):822-831.
  • 4Dong J,Chen J,Chen Z,et al.Air-side thermal hydraulic performance of offset strip fin aluminum heat exchangers[J].Applied Thermal Engineering,2007,27(2/3):306-313.
  • 5Dong J,Chen J,Chen Z,et al.Heat transfer and pressure drop correlations for the multi-louvered fin compact heat exchangers[J].Energy Conversion and Management,2007,48(5):1506-1515.
  • 6Yang C Y,Webb R L.Condensation of R-12 in small hydraulic diameter extruded aluminum tubes with and without micro-fins[J].International Journal of Heat and Mass Transfer,1996,39(4):791-800.
  • 7Yang C Y,Webb R L.Friction prcssure drop of R-12 in small hydraulic diameter extruded aluminum tubes with and without micro-fins[J].International Journal of Heat and Mass Transfer,1996,39(4):801-8O9.
  • 8Gnielinski V.New equations for heat and mass transfer in turbulent pipe and channel flow[J].International Chemical Engineering:25th anniversary issue,1961-1985,1988,41(1):126.
  • 9赵振南.传热学[M].北京:高等教育出版社,2002..
  • 10包涛,陈蕴光,董玉军,袁秀玲,董晓俊.多元平行流冷凝器传热流动性能研究[J].制冷学报,2005,26(3):1-5. 被引量:27

二级参考文献6

  • 1Yi - Yie Yah, Tsing - Fa Lin. Condensation heat transfer and pressure drop of refrigerant R - 134a in a small pipe. International Journal of Heat and Mass Transfer, 1999, 42:697 - 708.
  • 2M B Ould Didi, N Kattan, J R Thome. Prediction of two - phase pressure gradients of refrigerants in horizontal tubes. International Journal of Refrigeration, 2002, 25:935 - 947.
  • 3Y Taitel, A E Dulder. A model for predicting flow regime transitions in horizontal and near horizontal gas- hqulid flow. A. 1.Ch. E. J, 1976, 22:47 - 55.
  • 4C - Y Yang, R L Webb. Condensation of R- 12 in small hydraulic diameter extruded aluminum tubes with and without micro- fins. International Journal of Heat Mass Transfer, 1996,39:791 - 800.
  • 5Bnmo Agostini, Barbara Watel, Andre Bontemps, et al. Friction factor and heat transfer coefficient of R154a liquid flow in mini- channels. Applied Thermal Engineering, 2002, 22:1821-1834.
  • 6彭雄兵,彦启森.新型分流式冷凝器性能的实验研究[J].工程热物理学报,1996,17(S1):95-98. 被引量:2

共引文献34

同被引文献23

  • 1舒朝晖,李丛来,陈焕新,金听祥,罗艳,符卫红,王福宝.扁管结构对平行流冷凝器制冷剂侧性能的影响[J].化工学报,2008,59(S2):129-133. 被引量:17
  • 2包涛,陈蕴光,董玉军,袁秀玲,董晓俊.多元平行流冷凝器传热流动性能研究[J].制冷学报,2005,26(3):1-5. 被引量:27
  • 3丁国良.制冷空调装置的计算机仿真技术[J].科学通报,2006,51(9):998-1010. 被引量:31
  • 4龚堰珏,张兴群,郑维智,项辉宇.汽车空调平行流式冷凝器热力性能计算机辅助分析[J].北京工商大学学报(自然科学版),2006,24(6):22-25. 被引量:21
  • 5周继军,施伟,甘云华.微尺度相变传热中的不稳定现象[J].节能技术,2007,25(1):19-22. 被引量:3
  • 6Park Y,Tafti D,et al. An assessment of the state of art, and potential design improvements, for flat-tube heat exchangers in air conditioning and refrigeration applications-Phase I [R]. ARTI-21 Final Report, 2001.
  • 7Kim M H, Bullard C W. Performance evaluation of a window room air conditioner with microchannel condensers[J]. Journal of Energy Resources Technology, 2003, 124(1): 47-55.
  • 8Satish G. Kandlikar. A Roadmap for Implementing Minichannels in Refrigeration and Air-Conditioning Systems-Current Status and Future Directions [J]. Heat Transfer Engineering,2007, 28 (12) :973-985.
  • 9Bullard Clark W., Practor John, Brezner Joseph, et al. Modeling and testing of a utility peak reducing residential hot/dry air conditioner (HDAC) using microchannel heat exchangers[J]. ASHRAE transactions, 2006, 112 (2): 162-170.
  • 10Park C Y, Hrnjak P. Experimental and numerical study on microchannel and round-tube condensers in a R410A residential air-conditioning system [J]. International Journal of Refrigeration, 2008.31 (5) : 822-831.

引证文献4

二级引证文献10

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部