摘要
为提高锅炉的热效率和出力程度,减少锅炉因不完全燃烧的三个因素而产生的能源浪费,提出在锅炉炉膛燃烧中心附近,加装一台"中电旋风"悬浮旋流助燃节能环保设备,将锅炉与该节能设备合二为一.利用节能设备将煤粒粉碎成煤粉,并使其雾化成气态后,通过管路以2.452kPa风压将煤粉和空气送入炉膛,并瞬间燃烧而迅速升高炉膛温度,促使完全燃烧.结果表明,此办法不仅提高了锅炉热效率和有效出力,还可节煤9.5%以上,且减少了污染物的排放,降低了企业的成本,也达到了节能减排的目的.
In order to enhance the thermal efficiency of boilers and the extent of efforts to reduce the boiler due to incomplete combustion resulting from the three factors of energy waste,this paper burning in the furnace near the center,the installation of a "CLP Tornado" floating swirl combustion energy saving and environmental protection equipment to the boiler together with the energy-saving equipment. The use of energy-saving equipment will be crushed into a pulverized coal particles and make it into a gas atomization,the water column through the pipe to 2.452 kPa wind pressure will be pulverized coal and air into the furnace,and instantaneous combustion temperature increased rapidly to full combustion. The results show that this approach not only improves the thermal efficiency of boilers and effective efforts can be more than 10% coal,and the reduction of pollutant emissions and reduce the cost of the enterprise,but also to achieve reduction of energy-saving purposes.
出处
《材料研究与应用》
CAS
2010年第4期273-277,共5页
Materials Research and Application
关键词
锅炉
加装设备
节能减排
boiler
installation of equipment
energy-saving emission reduction