期刊文献+

Preparation of a SiC/Cristobalite-AlPO_4 Multi-layer Protective Coating on Carbon/Carbon Composites and Resultant Oxidation Kinetics and Mechanism 被引量:8

Preparation of a SiC/Cristobalite-AlPO_4 Multi-layer Protective Coating on Carbon/Carbon Composites and Resultant Oxidation Kinetics and Mechanism
原文传递
导出
摘要 In order to improve the oxidation resistance of carbon/carbon (C/C) composites,a SiC/C-AlPO4 multi-layer coating was fabricated on the C/C composites by a simple and low-cost method.The internal SiC bonding layer was prepared by a two-step pack cementation process and the external C-AlPO4 coating was deposited by hydrothermal electrophoretic deposition process.Phase compositions and microstructures of the as-prepared multi-layer coating were characterized by X-ray diffraction (XRD),scaning electron microspocy (SEM) and energy dispersive spectrometer (EDS).Anti-oxidation properties,oxidation behavior and the failure behavior of the coated composites were investigated.The results indicate that the multi-layer coating exhibits obviously two-layer structure.The inner layer is composed of β-SiC,α-SiC phase with a scale of silicon phase.The outer layer is composed of cristobalite aluminum phosphate (C-AlPO4) crystallites.The SEM observation shows the good bonding between the inner and outer layers.The multi-layer coating displays an excellent oxidation resistance in air in the temperature range from 1573 to 1773 K,and the corresponding oxidation activation energy of the coated C/C composites is calculated to be 117.2 kJ/mol.The oxidation process is predominantly controlled by the diffusion of O2 through the C-AlPO 4 coating.The failure of the multi-layer coating results from the generation of the microholes that may be left by the escape of the oxidation gases. In order to improve the oxidation resistance of carbon/carbon (C/C) composites,a SiC/C-AlPO4 multi-layer coating was fabricated on the C/C composites by a simple and low-cost method.The internal SiC bonding layer was prepared by a two-step pack cementation process and the external C-AlPO4 coating was deposited by hydrothermal electrophoretic deposition process.Phase compositions and microstructures of the as-prepared multi-layer coating were characterized by X-ray diffraction (XRD),scaning electron microspocy (SEM) and energy dispersive spectrometer (EDS).Anti-oxidation properties,oxidation behavior and the failure behavior of the coated composites were investigated.The results indicate that the multi-layer coating exhibits obviously two-layer structure.The inner layer is composed of β-SiC,α-SiC phase with a scale of silicon phase.The outer layer is composed of cristobalite aluminum phosphate (C-AlPO4) crystallites.The SEM observation shows the good bonding between the inner and outer layers.The multi-layer coating displays an excellent oxidation resistance in air in the temperature range from 1573 to 1773 K,and the corresponding oxidation activation energy of the coated C/C composites is calculated to be 117.2 kJ/mol.The oxidation process is predominantly controlled by the diffusion of O2 through the C-AlPO 4 coating.The failure of the multi-layer coating results from the generation of the microholes that may be left by the escape of the oxidation gases.
出处 《Journal of Materials Science & Technology》 SCIE EI CAS CSCD 2010年第11期1021-1026,共6页 材料科学技术(英文版)
基金 supported by the National Natural Science Foundation of China (Grant No. 50772063) the Foundation of New Century Excellent Talent in University of China (Grant No. NCET-06-0893) the Doctorate Research Foundation of Ministry of Education of China(Grant No. 20070708001) the Graduate Innovation Fund of SUST
关键词 Carbon/carbon composites Aluminum phosphate Hydrothermal electrophoretic deposition COATINGS OXIDATION Carbon/carbon composites Aluminum phosphate Hydrothermal electrophoretic deposition Coatings Oxidation
  • 相关文献

参考文献15

  • 1J.F. Huang, H.J. Li and X.B. Xiong: New Carbon Mater., 2005, 20, 373.
  • 2Q.G. Fu, H.J. Li, K.Z. Li, X.H. Shi, M. Huang and G.D. Sun: Surf. Coat. Technol., 2006, 31, 3082.
  • 3J.F. Huang, F. Deng, X.B. Xiong, H.J. Li, K.Z. Li, L.Y. Cao and J.P. Wu: Adv. Eng. Mater., 2007, 9, 322.
  • 4J.F. Huang, X.R. Zeng, H.J. Li, X.B. Xiong and G.L. Sun: Sur~ Coat. Techno1., 2005, 190, 255.
  • 5Q.G. Fu, H.J. Li, Y.J. Wang, K.Z. Li and H. Wu: Ceram. Int., 2009, 35, 2525.
  • 6K.Z. Li, F.T. Lan, H.J. Li, X.T. Shen and Y.G. He: J. Eur. Ceram. Soc., 2009, 29, 1803.
  • 7Q.G. Fu, H.J. Li, K.Z. Li, X.H. Shi and M. Huang: Carbon, 2007, 45, 892.
  • 8Z.J. Wang and D.N. Ye: Chin. J. Geol., 1990, 287.
  • 9X.P. Wang and S. Tian: Rare Metal Mat. Eng., 2005, 34, 716.
  • 10J.H. Morris, P.G. Perkins, A.E.A. Rose and W.E. Smith: Chem. Soc. Rev., 1977, 6, 173.

同被引文献53

引证文献8

二级引证文献24

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部