期刊文献+

基于有限元分析的外转子无刷直流电动机优化设计 被引量:1

Optimal Design of Outer Rotor Brushless DC Motors Based on FEA
下载PDF
导出
摘要 建立了外转子无刷直流永磁电动机的二维和三维有限元模型,计算了电机的磁场分布、电密分布、起动转矩;得到不同工况下相关参数的分布图形和运行曲线。分析了磁路和尺寸设计对电机效率及其它性能的影响,为电机的进一步优化提供了理论根据和基础。最后制作一台实际样机验证方法的可行和可靠性。 Two-dimensional and three-dimensional finite element models were established in this paper,and the magnetic field distribution,current density distribution,starting torque were calculated.Figures and curves in different running states were obtained.The analysis of the impact of magnetic circuit and size design on motor efficiency and other parameters provides theoretical references and foundation for further optimization.Finally a prototype was made to verify the feasibility and reliability of this method.
机构地区 合肥工业大学
出处 《微特电机》 北大核心 2010年第12期10-13,共4页 Small & Special Electrical Machines
关键词 外转子 无刷直流电动机 优化设计 outer rotor brushless DC motor optimization design
  • 相关文献

参考文献8

  • 1Boules N. Prediction of no-load flux density distribution in PM machines[ J ]. IEEE Trans. on Industrial Application, 1985,21 ( 4 ) : IA-21 : 633-643.
  • 2梁艳萍,张建涛,索文旭,赵博,胡刚.双屏蔽复合转子电机涡流损耗分析[J].中国电机工程学报,2009,29(24):78-83. 被引量:25
  • 3张存山,范瑜.永磁无刷电机的电磁设计参数研究[J].北京交通大学学报,2004,28(5):99-102. 被引量:5
  • 4王兴华,励庆孚,王曙鸿.永磁无刷直流电机空载气隙磁场和绕组反电势的解析计算[J].中国电机工程学报,2003,23(3):126-130. 被引量:87
  • 5Yamazaki K. A Quasi formulation for analyzing characteristics of induction motors with skewed slots [ J ]. IEEE Transactions on Magnetics, 1998,34 ( 5 ) : 3624-3627.
  • 6Vahonen M S M, Parviaiene D S A, Pyrhanen J. Electromagnetic filed analysis of 3D structure of axial-flux solid-rotor induction motor[C]//International Symposium on Power Electronics, Electrical Drives, Automation and Motion. Taormina, Italy, 2006, 39 (20) :12-16.
  • 7Cifuentes A O, Kalbag A. A Performance Study of Tetrahedral and Hexahedral Elements in 3- D Finite Element Structural Analysis [ J ]. Finite Elements in Analysis and Design, 1992,12 ( 3-4 ) : 313 -318.
  • 8陈世坤.电机设计[M].北京:机械工业出版社,2000..

二级参考文献24

  • 1王泽忠,严烈通.异步电机斜槽转子三维涡流场计算[J].中国电机工程学报,1995,15(2):118-123. 被引量:11
  • 2张明玉,潘绵英,夏东伟,唐孝镐,林金铭.具有环形槽的复合转子异步电机的电磁场分析与端部系数计算[J].中国电机工程学报,1995,15(4):239-246. 被引量:12
  • 3常正峰,黄文新,胡育文,刘陵顺.基于二维解析法的光滑表面实心转子感应电机附加损耗的研究[J].中国电机工程学报,2007,27(21):83-88. 被引量:11
  • 4YamazakiK. Efficiency analysis of induction motor for ammonia compressors considering stray load losses caused by stator and rotor slot ripple[C]. IEEE Industry Applications Conference, Chicago, IL, USA, 2001.
  • 5Hanker A, Nordmann R. Measurement of losses caused by canned magnetic bearings[C]. 6th International Symposium on Magnetic Suspension Technology, Turin, Italy, 2001.
  • 6Peralta Sanchez. E, Smith A C. Line-start permanent-magnet machines using a canned rotor[J]. IEEE Transactions on Magnetics, 2007, 43(7): 1084-1089.
  • 7QasirnAA, EasthamJF. Design construction and testing of canned motors[C]. Second International Conference on Power Electronics Machines and Drives, Edinburgh, UK, 2004.
  • 8Yamazaki K, Haruishi. Stray load loss analysis of canned induction motor for hermetic compressor[J]. IEEE International Transactions on Electrical Machinery and Energy Conversion Systems, 2005, 20(5).- 224-228.
  • 9Garg V K, Raymond J. Magneto-thermal coupled analysis of canned induction motor[J]. IEEE Transactions on Energy Conversion, 1990, 5(3): 110-114.
  • 10Ho S L, Li L, and Fu W N. Inclusion of interbar currents in a network-field coupled time-stepping finite-element model of skewed-rotor induction motors[J]. IEEE Transactions on Magnetics, 1999, 35(5):4218-4225.

共引文献270

同被引文献3

引证文献1

二级引证文献14

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部