期刊文献+

叶片圆盘泵叶轮无叶区内部流场数值模拟 被引量:4

Numerical Simulation of the Internal Flow Field in the Bladeless Zone of the Impellers of Disk Pumps with Radial Straight Blades
下载PDF
导出
摘要 为研究叶片圆盘泵叶轮无叶区内的流动特征,采用RNGk-ε湍流模型与SIMPLEC算法,对叶片圆盘泵内三维不可压湍流场进行数值模拟,得到速度等值线图和压力等值线图,并对模拟结果进行分析。发现周向流动是叶片圆盘泵叶轮无叶区内的主要流动方式,无叶区内较大部分是低压区,无叶区内除存在轴向流动外还存在径向回流。 In order to study the flow characteristics in the bladeless zone of the impellers of disk pumps with radial straight blades,a numerical simulation was carried out of the three-dimensional incompressible turbulent flow field in the disk pumps with radial straight blades using RNG k-ε turbulent model and SIMPLEC algorithm,the contoured velocity drawing and pressure contour line drawing were obtained,and the simulative result was analyzed.It was found that the major type of flow in the bladeless zone was circumferential flow,most part of the bladeless zone was low pressure zone,there was radial backflow in the bladeless zone besides axial flow.
出处 《化工机械》 CAS 2010年第6期750-754,共5页 Chemical Engineering & Machinery
基金 国家科技重大专项课题"深水油气田开发钻完井工程配套技术"(2008ZX05026-001-12)
关键词 叶片圆盘泵 无叶区 数值模拟 径向回流 Disk Pump with Radial Straight Blade Bladeless Zone Numerical Simulation Radial Backflow
  • 相关文献

参考文献4

  • 1Gurth M I.Rotary Disc Pump.USA,4940385.
  • 2Pacello J,Hanas P.Disc Pump-Type Pump Technology for Hard-to-Pump Applications.17th International Pump Users Symposium.2000.
  • 3Benson S,Pacello J.Solving the Problems of Pumping Medium-to-High Density Paper Stock.World Pumps,1997(361):68-71.
  • 4王福军,黎耀军,王文娥,丛国辉,王利萍.水泵CFD应用中的若干问题与思考[J].排灌机械,2005,23(5):1-10. 被引量:94

二级参考文献47

  • 1徐朝晖,吴玉林,陈乃祥,刘宇,张梁,吴玉珍.基于滑移网格与RNG湍流模型计算泵内的动静干扰[J].工程热物理学报,2005,26(1):66-68. 被引量:51
  • 2王福军.CFD在水力机械湍流分析与性能预测中的应用[J].中国农业大学学报,2005,10(4):75-80. 被引量:54
  • 3Muggli F A, Holbein P, Dupont P. CFD calculation of a mixed flow pump characteristic from shutoff to maximum flow. Journal of Fluids Engineering, Transactions of the ASME, 2002, 124(3): 798~802.
  • 4Andersen M R, Gu Fahua, MacLeod P D. Application and validation of CFD in a turbomachinery design system.Porceedings of the ASME Process Industries Division, 2003,21~32.
  • 5Muller N, Einzinger J, Lepach T, Kramer S, Thum S,Schilling R. Application of a multi level CFD-technique for the design optimisation of hydraulic machinery bladings.Proceedings of the ASME Heat Transfer/Fluids Engineering Summer Conference 2004, v2: 601~608.
  • 6Majidi Kitano. Numerical study of unsteady flow in a centrifugal pump. Journal of Turbomachinery, 2005, 127(2):363~371.
  • 7Hornsby Craig. CFD-Driving pump design forward. World Pumps, 2002, 431:18~22.
  • 8Fluent Inc. Comprehensive Flow Solutions for Pump Applications. Fluent Inc., 2003.
  • 9ANSYS.CFX-TASCflow-旋转机械一体化解决方案[Z].ANSYS公司,2004..
  • 10Frobenius Moritz, Schilling Rudolf, Friedrichs Jens, Kosyna Gunter. Numerical and experimental investigations of the cavitating flow in a centrifugal pump impeller. ASME Fluids Engineering Division (Publication),2002, 257(2B):361~368.

共引文献93

同被引文献27

引证文献4

二级引证文献4

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部