期刊文献+

烷烃乳液润滑Si_3N_4陶瓷摩擦副的摩擦学特性研究 被引量:2

Investigation of the Tribological Properties of Si_3N_4 Ceramic Pair Lubricated by Emulsion of Alkane
下载PDF
导出
摘要 采用多种烷烃乳液以及添加剂对氮化硅陶瓷摩擦副进行润滑试验。试验结果表明:对于氮化硅陶瓷摩擦副来说,所有的烷烃都可以得到较好的润滑效果,摩擦因数最高的基础油也仅有0.13;相对于包含直链烷烃、支链烷烃和环状饱和烃的基础油和柴油,正构烷烃的摩擦因数更低,抗磨性能更好;润滑性能最佳的液体石蜡中添加极性添加剂氯化石蜡和油酸后,乳液的润滑性能变差,但加入有机硅乳液后则润滑性能大大提高,摩擦因数进一步降低为0.017。基于试验试剂的结构特征,得出对于水乳润滑剂来说,化学性质和分子结构与氮化硅陶瓷相似的有机物可以更好地在陶瓷摩擦副表面聚集从而起到更好的润滑效果的结论。 A series of experiments were performed to test the tribological properties of Si3N4 ceramic pair lubricated by emulsions of alkane.The experimental results show that all alkanes are very efficient lubricator for Si3N4 ceramic pair.The straight chain alkanes can perform better than branched paraffin or polycyclic saturated hydrocarbon.When added the liquid paraffin with chlorinated paraffin or oleic acid,the lubrication property becomes poor.But added with silicone oil emulsion,the lubrication property improves further.Based on the molecular structure of reagents,the conclusion can be drawn that the similar organic substance can lubricate Si3N4 ceramic pair better,because it can congregate on the ceramic surface better.
出处 《润滑与密封》 CAS CSCD 北大核心 2011年第1期20-23,共4页 Lubrication Engineering
基金 装备再制造技术国防科技重点实验室基金资助项目(9140C85040108OC8513)
关键词 烷烃 陶瓷 摩擦因数 添加剂 alkane Si3N4 ceramic friction coefficient addition agent
  • 相关文献

参考文献7

  • 1符锡仁.美国的热机用低成本陶瓷计划[M]//高性能结构陶瓷论文集.北京:人民交通出版社,1998:15-41.
  • 2Tian X L, Wu Z Y, Hu Z X. Study on the High Efficiency Grinding Fluid Used for Ceramics Grinding[ J ]. Key Engineering Materials,2005,280/281/282/283 : 1787 - 1790.
  • 3Hsu Stephen. Methods for Machining Hard Materials Using Alcohols : USA,6206764 [ P ]. 1998 - 04 - 16.
  • 4Wang Jerry, Hsu Stephen. Chemically Assisted Process for the Machining of Ceramics : USA,5447466 [ P ]. 1995 - 09 - 05.
  • 5杨金晓,郑家敏,苏晓峰.微乳化液的应用[J].机械工人(冷加工),2002(5):11-12. 被引量:2
  • 6齐浩,韦淡平,范静芸.一种水基润滑液的制备方法:中国,1566295A[P].2005-01-19.
  • 7Majumdar A, Bhushan B. Fractal model of elastic-plastic contact between rough surface [ J ]. J Triboloby ( ASME ) , 1991, 113:1 -11.

共引文献2

同被引文献50

引证文献2

二级引证文献17

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部