期刊文献+

塑性形变对高强度管线钢组织与韧性的影响 被引量:2

Impact of Plasticity Deformation on Microstructure and Toughness of High Strength Pipeline
下载PDF
导出
摘要 通过扫描电子显微镜、透射电子显微镜以及相应的力学性能测试,观察和分析了X100级管线钢塑性形变前后的微观组织及其韧性变化情况.结果表明:在相同的温度和时间条件下,随着应变量增加,针状铁素体和粒状贝氏体组织均发生形变,高密度位错在M/A岛周围积聚并形成亚晶界和晶界;形变后的晶粒变小,内部仍分布着许多亚晶界结构,且晶界的M/A组织和形变后组织内部缺陷降低了材料的冲击功;X100级管线钢在-34°C以内的应变时效敏感系数满足要求. The effects of plastic deformation on the microstructure evolution and toughness properties of X100 pipeline structure steel were studied by scanning electron microscope(SEM),transmission electron microscope(TEM) and mechanical test.The results show that both acicular ferrite and granular bainite change remarkably with the value of stress under the same aging temperature and time.Simultaneously,the high density dislocation agglomerates around the M/A island,forms the sub-grain boundary and the crystal boundary.After the deformation,the grain sizes decrease,while there are many sub-grain structures distributed in crystal,and the material impact toughness drops remarkably due to M/A constitution distributed on the crystal boundary and the deformation flaws.Correspondingly,the sensitive coefficient of strain-aging of grade X100 pipeline meets the needs when the temperature is above-34(°C).
出处 《上海交通大学学报》 EI CAS CSCD 北大核心 2011年第1期30-34,共5页 Journal of Shanghai Jiaotong University
基金 省部级重大专项基金项目(2008A-3005) 中国博士后基金资助项目(18420006)
关键词 管线钢 塑性形变 微观组织 M/A组织 pipeline steel plastic deformation microstructure M/A constitution
  • 相关文献

参考文献16

  • 1李鹤林.油气输送钢管的发展动向与展望[J].焊管,2004,27(6):1-11. 被引量:123
  • 2Takuya H, Eiji T, Hiroshi M, et al. Metallurgical design and development of X100/X120 high strength line pipe steel [C]//X100/X120 Level High Performance Pipeline Steel International High-Level Forum. Beijing: China Machine Press, 2005: 136-144.
  • 3谢勇,余伟,武会宾,张立强,任毅.优化控冷制度改善X120管线钢的组织和性能[J].上海金属,2007,29(2):40-43. 被引量:16
  • 4曹长娥.X100管线钢管的开发[J].焊管,1999,22(2):53-59. 被引量:13
  • 5Okatsu M, lshikawa N, Endo S, et al. Development of high strength linepipes with excellent deformability [C]//ASME2005 24nd International Conference on Offshore Mechanics and Arctic Engineering (OMAE2005). Halkidiki, Greece: National Technical University of Athens, 2005 : 63-70.
  • 6Sanderson N, Ohm R K, Jacobs M. Study of X100 linepipe costs points to potential savings [J]. Oil and Gas Journal, 1999, 15 (3):54-57.
  • 7Glover A. Design, application and installation of an Xt00 pipeline [ C]//ASME2003 22nd International Conference on Offshore Mechanics and Arctic Engineering ( OMAE2003 ). Cancun, Mexico: Marine Talk, 2003: 307-318.
  • 8Suzuki N, Kato A, Yoshikawa M, et al. Line pipes having excellent earthquake resistance [J].NKK Giho, 1999, 167 (3): 44-49.
  • 9Shikanai N, Kagawa H, Kurihara M, et al. Influence of microstructure on yielding behavior of heavy gauge high strength steel plates [J]. ISIJ International, 1992, 32 (3): 335-342.
  • 10鲁晓声.14MnVTiReA钢应变时效性能研究[J].材料开发与应用,1999,14(2):11-13. 被引量:12

二级参考文献43

  • 1李鹤林.油气输送钢管的发展动向与展望[J].焊管,2004,27(6):1-11. 被引量:123
  • 2尚成嘉,杨善武,王学敏,侯华兴,于功利,王文仲.低碳贝氏体钢的组织类型及其对性能的影响[J].钢铁,2005,40(4):57-61. 被引量:70
  • 3方鸿生,杨志刚,杨金波,白秉哲.钢中贝氏体相变机制的研究[J].金属学报,2005,41(5):449-457. 被引量:37
  • 4寺田好男 曹长娥译.-[J].新日铁技报,1997,(362):38-42.
  • 5-.第九届国际船舶结构会议论文集[M].洛阳:中国船舶工业总公司洛阳船舶材料研究所,1992.216.
  • 6Zhao J Z, De A K, De Cooman B C. Kinetics of Cottrell atmosphere formation during strain aging of ultra-low carbon steels. Mater Lett, 2000, 44:374
  • 7Tkalcec I, Mari D, Benoit W. Correlation between internal friction background and the concentration of carbon in solid solution in a rnartensitic steel. Mater Sci Eng, 2006, A442:471
  • 8Blanter M S, Golovin I S, Neuhauser H, et al. Internal Friction in Metallic Materials. Berlin: Springer-Verlag Berlin Heidelberg, 2007
  • 9机械工程手册、电机工程手册编辑委员会.机械工程手册:工程材料卷.2版.北京:机械工业出版社.1996
  • 10Chino H,Tamehiro H.Proc.of pipe line technology Con-f..Park A,K.UIU,Antwerpen,1990.41

共引文献173

同被引文献17

  • 1Q/CNPC109-2005X80管线钢冷弯管制作及验收规范[S].北京:中国石油天然气集团公司,2005.
  • 2李鹤林,李霄,吉玲康,陈宏达.油气管道基于应变的设计及抗大变形管线钢的开发与应用[J].焊管,2007,30(5):5-11. 被引量:108
  • 3Sen M,Cheng J J R,Murray D W,et al. Mechanical propertiesof cold bend pipes [J]. Journal of Pressure Vessel Technology,2008,(130):1-6.
  • 4Naoki F,Hiroshi Y,Shinobu K,e? al. Experimental and analyti-cal study of cold bending process for pipelines [J]. Journal ofOffshore Mechanics and Arctic Engineering, 2003,125:53-157.
  • 5Hiroshi Y,Naoki F,Tomoki M,et al . Effect of materialstress-strain behavior and pipe geometry on the deformability ofhigh-grade pipelines [J], Journal of Offshore Mechanics andArctic Engineering, 2004,126: 13-119.
  • 6Naoki F,Hiroshi Y,Tomoki M,et al. Tensile properties of coldbends for line pipes[J]. Journal of Offshore Mechanics and Arctic Engineering ,2007,129 : 229-235.
  • 7Sen M,Cheng J J R,Zhou J,Behavior of cold bend pipes underbending loads [J], Journal of Structural Eengineering, 2011, (5):571-578.
  • 8DNV-OS-F101 -2000, Offshore Standard[S].
  • 9CSA Z662-2007 ,Oil and Gas Pipeline Systems[S].
  • 10Q/SY GJX 0109-2008,西气东输二线管道工程线路工程施工技术规范[S].

引证文献2

二级引证文献10

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部