梳棉机锡林与活动盖板间隔距的探讨

Discussion on Determining the Gauge between the Card Cylinder and the Movable Flat

分析了不同"隔距工艺配置"的特点,指出锡林与活动盖板的出口隔距的大小应根据活动盖板的运动方向来加以确定,当活动盖板正转时,出口隔距可略大一些;当活动盖板反转时,出口隔距应小一些配置。梳棉机锡林与活动盖板间的隔距以采用"渐缩隔距工艺"为宜。同时对影响梳棉机锡林与活动盖板间隔距大小确定的因素也做了具体的分析。

The characteristics of different 'gauge configuration' were analyzed in this paper drawing out the conclusion that the exit gauge between the cylinder and movable flat shall be determined according to the movement direction of movable flat.When the movable flat rotates clockwise,the exit gauge can be slightly larger while the gauge shall be smaller when rotating anticlockwise.A tapered-gauge technique shall be adopted to determine the gauge between the card cylinder and the movable flat.Parameters that influence the determining of gauge were also investigated.