期刊文献+

晶粒组织对7475铝合金晶间腐蚀性能的影响 被引量:5

Effect of Grain Structure on Intergranular Corrosion Resistance of 7475 Aluminum Alloy
下载PDF
导出
摘要 采用金相显微镜、透射电镜、腐蚀浸泡试验和极化曲线测试研究了晶粒组织对7475铝合金抗晶间腐蚀能力的影响。结果表明:部分再结晶较完全再结晶的7475铝合金有更正的腐蚀电位,更小的腐蚀电流,以及更小的晶间腐蚀深度;因此具有更好的抗晶间腐蚀能力。部分再结晶的7475铝合金中再结晶区域与未再结晶区域在法向上呈层状分布,未再结晶组织中包含大量的亚晶界,一定程度延缓晶间腐蚀的发展,从而提高合金的抗晶界腐蚀能力。 The effect of grain structure on the intergranular corrosion resistance of 7475 aluminum alloy was investigated by optical microscopy, transmission electron microscopy, corrosion immersion test and polarization curve testing. The results showed that the partially-recrystallized 7475 Al alloy exhibited more positive corrosion potential, lower corrosion current and smaller intergranular corrosion depth than the completely-recrystallized 7475 Al alloy. Thus, the former alloy had better intergranular corrosion resistance. In this alloy, the recrystallized and unrecrystallized zones showed layered distribution along normal direction. The subgrain boundaries contained in the unrecrystallized zone could retard the occurrence of corrosion, thus improved the intergranular corrosion resistance.
作者 黄明初
出处 《矿冶工程》 CAS CSCD 北大核心 2010年第6期97-99,共3页 Mining and Metallurgical Engineering
关键词 晶粒组织 7475铝合金 晶间腐蚀 grain structure 7475 Al alloy intergranular corrosion
  • 相关文献

参考文献8

  • 1Sinyavskii V S,Ulanova V V,Kalinin V D.On the mechanism of intergranualr corrosion of aluminum alloys[J].Protection of Metals,2004,40(5):537-546.
  • 2张新明,刘胜胆,刘瑛,张小艳.淬火速率和锆含量对7055型铝合金晶间腐蚀的影响[J].中南大学学报(自然科学版),2007,38(2):181-185. 被引量:22
  • 3张新明,李鹏辉,刘胜胆,李国锋,朱航飞,周新伟.回归时间对7050铝合金晶间腐蚀性能的影响[J].中国有色金属学报,2008,18(10):1795-1801. 被引量:29
  • 4Ramgopal T,Gouma P I,Frankel G S.Role of grain boundary precipitates and solute-depleted zone on the intergranular corrosion of aluminum alloy 7150[J].Corrosion,2002,58(8):687-697.
  • 5Peng G S,Chen K H,C F H.The effect of recrystallization on corrosion and electrochemical behavior of 7150 Al alloy[J].Materials and Corrosion,2009,60:1-6.
  • 6Robson J D,Prangnell P B.Predicting the recrystallized volume fraction in AA7050 hot rolled plate[J].Materials Science and Technology,2002,18(6):607-619.
  • 7Starke J E A,Staley J T.Application of modern aluminum alloys to aircraft[J].Prog Aerosapce Sci,1996,32:131-172.
  • 8刘胜胆,张新明,黄振宝,杜予晅,周卓平.固溶处理对高纯7055铝合金组织的影响[J].材料热处理学报,2006,27(3):54-59. 被引量:39

二级参考文献51

共引文献84

同被引文献47

  • 1苏景新,张昭,曹发和,张鉴清,曹楚南.铝合金的晶间腐蚀与剥蚀[J].中国腐蚀与防护学报,2005,25(3):187-192. 被引量:100
  • 2尹为恺,朱福如,彭文屹,廖钟亮.疲劳试验中的数据处理[J].洪都科技,1995(1):33-42. 被引量:8
  • 3刘胜胆,张新明,游江海,张小艳,周卓平.淬火介质对7055铝合金晶界析出行为的影响[J].特种铸造及有色合金,2006,26(11):696-698. 被引量:11
  • 4袁伟,孙秦.DFR法结构细节疲劳强度分析[J].陕西理工学院学报(自然科学版),2007,23(1):9-11. 被引量:15
  • 5Murakami Y. Recent investigations on precipitation phenomena of aluminum alloys [J]. Light Metals Technology, 1988,29(1): 3-17.
  • 6Lendvai J. Precipitation and strengthening in aluminum alloys [J]. Materials Science Forum, 1996,217-222:43-56.
  • 7Haas M D E. Grain Boundary Phcnomana and Failure of Aluminum Alloys [D]. Groningen :University of Groningen, 2002.
  • 8Porter D A, Easterling K E. Phase Transformation in Metals and Alloys [M]. Oxford:Alden Press, 1981.
  • 9Starink M J, Wang S C. A model for the yield strength of overaged Al-Zn-Mg-Cu alloys [J]. Acta. Materialia,2003,51: 5131-5150.
  • 10王祝堂,田荣璋.铝合金及其加工手册[M].长沙:中南大学出版社,2002.

引证文献5

二级引证文献23

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部