1REPINS I,CONTRERAS M A,EGAAS B,et al.19.9%-efficient ZnO/CdS/CuInGaSe2 solar cell with 81.2% fill factor[J].Progress in Photovoltaics:Research and Applications,2008,16(3):235-239.
2KESSLER J,BODEGARD M,HEDSTROM J,STOLT L.New world record Cu(In,Ga)Se2 based mini-module:16.6%[C] //Proceedings,16th European Photovoltaic Solar Energy Conference,Glasgow,2000:2057-2060.
3KUSHIYA K,TANAKA Y,HAKUMA H,et al.Interface control to enhance the fill factor over 0.70 in a large-area CIS-based thin-film PV technology[J].Thin Solid Films,2009,517(7):2108-2110.
4DAI S,WANG K,WENG J,et al.Design of DSC panel with efficiency more than 6%[J].Solar Energy Materials and Solar Cells,2005,85(3):447-455.
5GAO F,WANG Y,SHI D,et al.Enhance the optical absorptivity of nanocrystalline TiO2 film with high molar extinction coefficient ruthenium sensitizers for high performance dye-sensitized solar cells[J].Journal of the American Chemical Society,2008,130(32):10720-10728.
6BAI Y,CAO Y,ZHANG J,et al.High-performance dye-sensitized solar cells based on solvent-free electrolytes produced from eutectic melts[J].Nature Materials,2008,7(8):626-630.
7DAI S,WENG J,SUI Y,et al.The design and outdoor application of dye-sensitized solar cells[J].Inorganica Chimica Acta,2008,361(3):786-791.
8YAN B,YUE G,YANG J,et al.Correlation of current mismatch and fill factor in amorphous and nanocrystalline silicon based high efficiency multi-junction solar cells[C] //33rd IEEE PVSC,San Diego,California,USA,2008.
9SMETS A H M,MATSUI T,KONDO M.High-rate deposition of microcrystalline silicon p-i-n solar cells in the high pressure depletion regime[J].Journal of Applied Physics,2008,104(3):34508.
10KONDO M.Microcrystalline materials and cells deposited by RF glow discharge[J].Solar Energy Materials & Solar Cells,2003:543-566.
