摘要
利用Moldflow软件的最佳浇口位置分析功能确定出最佳浇口位置。研究了注塑成型工艺参数对注塑件缩痕的影响,对不同的工艺参数进行了分析,确定出用于注塑成型的较合适的工艺参数。研究结果表明:熔体温度、模具温度的降低以及注射时间的增加都能够有效的减小缩痕。
Moldflow software was used to obtain the best gate location.Influence of injection molding processing parameters on sink marks of injection-piece was studied.The effects of different processing parameters were analyzed and better processing parameters were obtained.The results of research show that decreasing melt temperature,mold temperature and increasing injection time can effectively reduce the sink marks.
出处
《轻工机械》
CAS
2011年第1期1-3,7,共4页
Light Industry Machinery
基金
浙江省自然科学基金项目(Y106847)
(Y1090153)
