摘要
提出用无压渗透法制备铸造表面复合材料的新方法。通过预先制备带有孔隙的硼铁合金预制块,用普通浇注的方法,获得以灰铸铁为基的铸造表面复合材料。复合层从化合物层到亚共晶层的厚度达8mm,其组织和硬度由表层向基体呈梯度分布。
A pressureless permeating method is put forward. Using a prefabricated porous ferroboron lump, a surface composite layer was made on gray cast iron matrix, with a common casting method. The thickness of the surface layer is 8mm; the hardness and microstructure change gradiently. Sliding wear test shows that the wear resistance of the composite surface is higher than that of Cr12 type high chromium cast iron.
出处
《复合材料学报》
EI
CAS
CSCD
北大核心
1999年第3期57-61,共5页
Acta Materiae Compositae Sinica