摘要
采用自制氧化蜡制备汽车防锈乳化蜡,考察了氧化蜡的质量分数、复合乳化剂的质量分数、乳化温度、搅拌速率、乳化时间及防锈剂类型和用量对乳液性能的影响。结果表明,在氧化蜡的质量分数为15%,复合乳化剂的质量分数为7%,乳化温度为85~90℃,搅拌速率在1 000 r/min左右,乳化时间为40 min时,可以得到稳定的乳化蜡。选择防锈剂T-704添加到乳化蜡溶液中去,制备出性能稳定,防锈效果好的乳化型汽车防锈蜡。
Method of preparing anti-rusting wax-emulsion with oxidized wax was studied.Factors of affecting emulsion stability,such as the quantity of oxidized wax and complex emulsifier,emulsifying temperature,stirring speed,emulsifying time,and anti-rusting type and agent,were investigated.Experiment results showed that one stable wax-emulsion can be prepared when quantity of oxidized wax is 15%,quantity of complex emulsifier is 7%,emulsifying temperature is 85~90 ℃,stirring speed is 1000 r/min,and emulsifying time is 40 min.One good anti-rusting wax-emulsion for automobile can be prepared when the antirust T-704 was selected.
出处
《应用化工》
CAS
CSCD
2011年第1期182-185,共4页
Applied Chemical Industry
关键词
汽车防锈蜡
氧化蜡
乳化蜡
乳化剂
防锈剂
automobile anti-rusting wax
oxidized wax
emulsifying wax
emulsifier
antirust