卷圆机工作过程的有限元模拟方法
Finite Element Simulation of Roll-rounder Process
摘要
采用有限元法模拟卷圆机工作过程,获得大量数据对设计新的卷圆机具有参考意义。
The working process of the roll-roun is simulated by the finite element method.A lot of data is obtained and gives a reference for designing.
出处
《煤矿机电》
2011年第1期74-74,78,共2页
Colliery Mechanical & Electrical Technology
关键词
卷圆机
有限元法
模拟
roll-rounder
finite element method
simulation
参考文献3
-
1王金彦,陈军,李明辉.板料成形回弹数值模拟的有限元模型及非协调模式[J].机械工程学报,2005,41(10):6-10. 被引量：8
-
2赵国伟,王元勋,陈建桥,李荣峰,祝洪川.板料成形回弹的数值模拟与影响因素[J].锻压装备与制造技术,2005,40(3):55-58. 被引量：22
-
3Y.H.Lin,M.hua.Influence of strain hardening on continuous plate roll-bending proeess[J],International Journal of Non-Linear Mechanics,35 (2000).
二级参考文献25
-
1Liu W K, Hu Y K, Belytschko T. Multiple quadrature underintegrated finite elements. International Journal for Numerical Methods in Engineering, 1994, 37:3 263～3 289
-
2Belytschko T, Leviatham I. Phisical stabilization of the 4-node shell element with one point quadrature. Computer Methods in Applied Mechanics and Engineering, 1994,113: 321～350
-
3Wang C T. An industrial outlook for springback predictability, measurement reliability and compensation technology. NUMISHEET'2002, 2002, Jeju Island, Korea, 2002:597～604
-
4Hughes T J R, Liu W K. Nonlinear finite element analysis of shells: Part Ⅰ three-dimensional shells. Computer Methods in Applied Mechanics and Engineering,1998,155: 193～234
-
5Belytschko T, Lin J I, Tsay C S. Explicit algorith ms for the nonlinear dynamics of shells. Computer Methods in Applied Mechanics and Engineering, 1984, 42:225～251
-
6Parisch H. A continuum-based shell theory for non-linear applications. International Journal for Numerical Methods in Engineering 1995, 38:1 855～1 883
-
7Hauptmann R, Schweizerhof K. A systematic development of ‘solid-shell' element formulations for linear and non-linear analyses employing only displacement degrees of freedom. International Journal for Numerical Methods in Engineering, 1998, 42:49～69
-
8Miehe C. A theoretical and computational model for isotropic elastoplastic stress analysis in shells at large strains.Computer Methods in Applied Mechanics and Engineering,1998, 155: 193～234
-
9Büchter N, Ramm E, Roehl O. Three dimensional extension of non-linear shell formulation based on the enhanced assumed strain concept. International Journal for Numerical Methods in Engineering, 1994, 37:2 551～2 568
-
10Sansour C. A theory and finite element formulation of shells at finite deformation involving thickness change. Archive of Applied Mechanics, 1995, 65:194～216
共引文献28
-
1ZHANG Hua-wei 1 , LIU Li-zhong 1 , HU Ping 1 , LIU Xiang-hua 2 ( 1.Faculty of Vehicle Engineering and Mechanics , State Key Laboratory of Structural Analysis for Industrial Equipment , Dalian University of Technology , Dalian 116024 , Liaoning , China ,2.Research Institute of Science and Technology , Northeastern University , Shenyang 110819 , Liaoning , China ).Numerical Simulation and Experimental Investigation of Springback in U-Channel Forming of Tailor Rolled Blank[J].Journal of Iron and Steel Research International,2012,19(9):8-12. 被引量：3
-
2焦明华,于军涛,解挺,俞建卫,刘焜.板材冲压成形回弹模拟的评述[J].锻压技术,2007,32(6):1-6. 被引量：15
-
3雷华桢,王东方.板料冲压成形及回弹数值模拟的应用与研究[J].锻压装备与制造技术,2007,42(6):52-56. 被引量：6
-
4邓兆虎,张祖军,胡卫才,阮锋.板料卷圆回弹分析及数值模拟[J].锻压装备与制造技术,2008,43(1):51-54. 被引量：7
-
5黄亚娟,丘宏扬.汽车冲压件的回弹控制研究[J].锻压装备与制造技术,2008,43(2):61-64. 被引量：4
-
6唐炳涛,王兆清,鹿晓阳,张郁.有效的板料成形反向模拟法应力修正策略[J].计算物理,2008,25(5):585-590.
-
7罗云华,王磊.高强钢板冲压回弹影响因素研究[J].锻压技术,2009,34(1):23-26. 被引量：44
-
8叶玉刚,薛勇,段江年.板料成形回弹模拟及补偿技术研究现状[J].锻压装备与制造技术,2009,44(3):18-22. 被引量：19
-
9杨平,周杰,朱若岭,权国政.金属板料拉深回弹成因及回弹补偿研究[J].机械设计与制造,2009(9):134-136. 被引量：16
-
10唐炳涛,赵震,王兆清.板料成形反向模拟精度修正法[J].机械工程学报,2009,45(10):300-305. 被引量：2
-
1杨晋穗.XD—Y002液压车轮轮辋卷圆机[J].锻压机械,1993,28(6):46-48.
-
2王伯楠,杨维平,杨湛.一种多功能卷圆机的结构设计[J].锻压装备与制造技术,2017,52(2):53-54.
-
3陈兰.在卷圆机上卷制大型槽钢零件[J].科技信息,2010(19).
-
4赵长江,张军.厚壁小筒径形工件的一次成形[J].锻压技术,1996,21(6):21-23.
-
5◆大明加工中心将引进型弯机和卷圆机以增强成型加工能力[J].不锈（市场与信息）,2013(2):4-4.
-
6许云龙,叶团结.铰链式摆动辊型钢卷圆机[J].风机技术,1997,39(1):25-26.
