期刊文献+

SBR COMPOSITES REINFORCED WITH N-ISOPROPYL-N'PHENYL-P-PHENYLENEDIAMINE-MODIFIED CLAY 被引量:3

SBR COMPOSITES REINFORCED WITH N-ISOPROPYL-N'PHENYL-P-PHENYLENEDIAMINE-MODIFIED CLAY
原文传递
导出
摘要 SBR compounds including the N-isopropyl-N'-phenyl-p-phenylenediamine-modified clay(organoclay) were prepared.Effects of modified clay and antioxidant(IPPD) contents on mechanical and rheological properties of SBR composites were studied.FTIR results confirmed that the clay was chemically modified by IPPD and changed into an organoclay.X-ray diffraction(XRD) results confirmed the increase in interlayer distance of the clay due to the insertion of IPPD.Rheological and cure characteristics of SBR compounds were determined using RPA(Rubber Process Analyzer) and rheometer.Scorch time and cure time of SBR compounds decreased with introduction of the organoclay.Mechanical properties and heat aging resistance of the SBR composites were improved significantly by incorporation of the organoclay. SBR compounds including the N-isopropyl-N'-phenyl-p-phenylenediamine-modified clay(organoclay) were prepared.Effects of modified clay and antioxidant(IPPD) contents on mechanical and rheological properties of SBR composites were studied.FTIR results confirmed that the clay was chemically modified by IPPD and changed into an organoclay.X-ray diffraction(XRD) results confirmed the increase in interlayer distance of the clay due to the insertion of IPPD.Rheological and cure characteristics of SBR compounds were determined using RPA(Rubber Process Analyzer) and rheometer.Scorch time and cure time of SBR compounds decreased with introduction of the organoclay.Mechanical properties and heat aging resistance of the SBR composites were improved significantly by incorporation of the organoclay.
出处 《Chinese Journal of Polymer Science》 SCIE CAS CSCD 2011年第2期191-196,共6页 高分子科学(英文版)
关键词 SBR ORGANOCLAY Mechanical properties Cure characteristics ANTIOXIDANT SBR Organoclay Mechanical properties Cure characteristics Antioxidant
  • 相关文献

参考文献28

  • 1Al-Malaika, S., in "Handbook of polymer science and technology, performance properties of plastics and elastomers, Vol. 2", ed. by Cheremisinoff, N.P., Marcel Dekker Inc., New York & Basel, 1989, p. 261.
  • 2Scott, G., "Stabilization and degradation of polymers", American Chemical Society, Washington, 1978.
  • 3Al-Malaika, S. and Scott, G., Eur. Polym. J., 1980, 16:709.
  • 4Scott, G., "Developmets in polymer stabilization", Applied Science, London, 1981.
  • 5Pospisil, J., in "Developments in polymer stabilization, Vol. 7", ed. by Scott, G., Elsevier Applied Science, London, 1984, p. 1.
  • 6Helaly, F.M., Darwich, W.M. and Ghaffar, A., Polym. Degrad. Stab., 1999, 64:251.
  • 7Das, A., Naskar, N. and Kumar Basu, D., J. Appl. Polym. Sci., 2004, 91:1913.
  • 8Ismail, M.N., Yehia, A.A. and Korium, A.A., J. Appl. Polym. Sci., 2002, 83:2984.
  • 9Badran, B.M., Younan, A.F., Ismail, M.N. and Shehata, A.B., Elastomerics, 1990, 122(2): 26.
  • 10Younan, A.F., A1-Kobtan, A.F. and Badran, B.M., J. Appl. Polym. Sci., 1993, 49:1123.

同被引文献10

引证文献3

二级引证文献12

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部