期刊文献+

一种电力架空线垂度的简算方法 被引量:1

A SIMPLE SOLUTION FOR THE SAG OF TROLLY WIRE
下载PDF
导出
摘要 以输配电工程中带有绝缘子的电力架空线为研究对象,简化绝缘子的力学模型,采用纵横弯曲理论推导了钢芯铝铰线的挠度方程,计算了在自重和温度载荷共同作用下的架空线垂度和水平张力.计算结果表明,文中算法简单有效,架空线跨距和温度等是架空线垂度的主要影响因素.架空线垂度对温度的平均变率为2.55 mm/℃;当跨距减小1%时,垂度增加近60%. A trolly wire with insulators in electric transmissions is investigated in this paper.Based on longitudinal-transversal bending theory,the deflection curve equations of aluminum cable steel reinforced is derived.The sag and the horizontal tension of the trolly wire are obtained based on a insulator's simplified model under dead weight and temperature loads.The results show that the method in this paper is simple and effective.The main influencing factors of the sags are temperature and span of trolly wire.The average variation rate of the sag to temperature is 2.55 mm/℃;the sag will be almost increased by 60%when the span of trolly wire decreases 1%.
机构地区 东北大学理学院
出处 《力学与实践》 CSCD 北大核心 2011年第1期64-65,共2页 Mechanics in Engineering
关键词 纵横弯曲 架空线 绝缘子 垂度 longitudinal-transversal bending trolly wire insulator sag
  • 相关文献

参考文献8

二级参考文献42

共引文献59

同被引文献5

  • 1洪业.工业机器人夹持器机构的研究[J].机械设计,1997,14(4):18-21. 被引量:6
  • 2Jun Sawada,Kazuyuki. A Mobile Robot for Inspection of Power Transmission Lines[J].IEEE Transactions on Power Delivery,1991,(01):309-315.doi:10.1109/61.103753.
  • 3卢秉恒.机械制造技术基础(第2版)[M]北京:机械工业出版社,2005.
  • 4李增刚.ADAMS人门详解与实例[M]北京:国防工业出版社,2006.
  • 5蒲广益.ANSYS Workbench 12基础教程与实例详解[M]北京:中国水利水电出版社,2010.

引证文献1

二级引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部