摘要
采用共沉淀法,通过氨水调节沉淀剂碳酸氢铵的pH值,制备了一系列Y2O3:1%Er样品。傅里叶变换红外光谱以及元素分析表明,沉淀剂pH值在8.0~9.5之间变化时,前驱沉淀物化学结构基本不变;而X射线荧光谱仪分析与SEM形貌表征的结果表明,pH值改变时不仅会导致前驱沉淀物中Er含量的变化,而且使得煅烧后粉末颗粒的粒径及其分布发生改变。测量煅烧后粉末样品的荧光光谱,结果显示,pH值变化引起的Er含量和颗粒粒径的变化,都会导致粉末样品发光性质产生差异。
Samples of Y2O3:1%Er were prepared by coprecipitation method and the pH value of precipitant ammonium bicarbonate was adjusted by ammonia.Results of Fourier transform infrared spectra(FTIR) and elemental analysis showed that the chemical construction of precursors at pH range of 8.0~9.5 had little change.By X-ray fluorescence spectrometer(XRF) and scanning electron microscope(SEM) analysis,it was found that the pH value of precipitant had a significant impact on the content of erbium in precursor and it can influence particle size as well as its distribution of the products,both of which had important effects on the luminescent properties of the products.
出处
《光谱学与光谱分析》
SCIE
EI
CAS
CSCD
北大核心
2011年第3期612-616,共5页
Spectroscopy and Spectral Analysis
基金
国家自然科学基金项目(10774140)
中国科学院知识创新项目(KJCX2-YW-M11)
高等学校博士学科点专项科研基金项目(20060358054)
安徽省人才开发基金项目(2007Z021)资助