期刊文献+

柴油机配气机构动力学特性的仿真与试验 被引量:8

Simulation and Experiment for Valve Train Dynamic Characteristic of Diesel Engine
下载PDF
导出
摘要 通过理论计算和试验进行了柴油机配气机构运动学与动力学分析研究,基于多体系统动力学理论,对配气系统动态特性进行了仿真和评价,构建了配气机构动态测试系统,进行了多参数同步测量试验。仿真模拟与试验测量结果表明:气门升程曲线连续光滑,最大气门落座速度小于许用落座速度,但落座瞬间气门加速度波动幅值较大,高速时气门落座有反跳现象,正常工作状态下气门间隙为动态变化间隙,计算和试验得到的气门运动曲线变化规律基本吻合,为配气机构的性能评价和优化设计提供有价值的参考依据。 Through the theoretical calculations and actual experiment,the kinematics and dynamics of valve train for diesel engine were analyzed and researched.Based on the theory of multi-body dynamics,the simulation and evaluation of valve train dynamic characteristics were carried out.The dynamic measurement system for valve train was established and multi-parameter simultaneous measurement experiment was carried out.The results show that the curve of valve lift is continuous and smooth.The maximum seating speed of valve is less than the allowable value,but the fluctuation of valve acceleration in the seating moment is worse.At high speed,there is a slight mechanism separation when the valve is seating.Under normal conditions,the valve clearance is dynamically changing.The simulation can be in agreement with the experiment on the whole,which provides a theoretical approach for the evaluation and optimization of valve train.
出处 《车用发动机》 北大核心 2011年第1期70-74,共5页 Vehicle Engine
关键词 柴油机 配气机构 动力学特性 多参数测量 diesel engine valve train dynamic characteristic multi-parameter measurement
  • 相关文献

参考文献4

二级参考文献12

  • 1王水来,马元镐,刘永长,朱隆碧,黄金运,陈伟.配气机构动态数据处理系统的研制[J].内燃机工程,1996,17(3):19-23. 被引量:4
  • 2俞海清 詹先泽 等.内燃机凸轮挺柱副动态弹流润滑油膜厚度计算及其润滑性能分析[J].内燃机学报,1984,2(2):125-140.
  • 3张立梅 张克刚.配气机构振动的研究[J].内燃机工程,1986,7(3):68-76.
  • 4Crane M E, Meyer R C. A process to predict friction in an automotive valve train [C]. SAE 901728.
  • 5Baniasad S M, Emes M R. Design and development of method of valve-train measurement [C]. SAE 980572.
  • 6林清安.Pro/Engineer2001[M].北京:清华大学出版社,2003.
  • 7尚汉冀.用摄动方法研究配气机构动力学.内燃机学报,1984,2(4):15-17.
  • 8LEE, JON-GMIN. Dynamic modeling and experimental verification of a valve train including lubrication and friction [ D ]. Michigan :The University of Michigan, 1993:30-35.
  • 9郑建荣.DAMS——虚拟样机技术入门与提高[M].北京:机械工业出版社,2001.
  • 10ADAMS - mechanical system simulation software Ryan, R. R (Mech. Dynamics Inc., Ann Arbor, MI, USA) 1993.

共引文献30

同被引文献60

引证文献8

二级引证文献11

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部