期刊文献+

金属陶瓷功能梯度材料的颗粒界面断裂能量释放率的研究 被引量:3

Study on the Energy Release Rate for the Particle/Matrix Interface of Functionally Gradient Materials
下载PDF
导出
摘要 研究了功能梯度材料富陶瓷区金属颗粒界面断裂能量释放率。采用双层嵌套模型给出了金属颗粒界面的热应力与金属体积浓度的关系,对于得到的每一梯度层中的颗粒界面热应力,分析了颗粒界面断裂能量释放率。 The study on the energy release rate for cracks propagating of particle and matrix interface in functionally gradient materials(FGM) was carried out.The thermal stress for the matrix-particle interface was calculated using Double-Layer-Embedment model,also the relation between the stress and metal volume fraction was obtained,and then the energy release rate and the change of critical particle size (radius) in the graded layers were given.
出处 《功能材料》 EI CAS CSCD 北大核心 1999年第4期385-386,共2页 Journal of Functional Materials
基金 国防科工委预研项目资助
关键词 功能梯度材料 金属颗粒 界面 热应力 能量释放率 functionally gradient materials(FGM) particle interface thermal stress energy release rate
  • 相关文献

参考文献3

二级参考文献1

  • 1张联盟,In 3rd Inter Sym on Structural and FGM,1995年

共引文献38

同被引文献28

  • 1王永康,王伟民,顾晓红,程祥宇,李炳生,夏立芳,雷延权.耐烧蚀梯度涂层材料的研究[J].兵器材料科学与工程,1994,17(4):7-11. 被引量:5
  • 2曾晓雁,陶曾毅,朱蓓蒂,崔昆.激光制备金属陶瓷复合层技术现状及展望[J].硬质合金,1994,11(3):187-192. 被引量:8
  • 3郭成,朱维斗,金志浩.梯度功能材料的研究现状与展望[J].稀有金属材料与工程,1995,24(3):18-25. 被引量:30
  • 4A Mortensen,S Suresh. Functionally Graded Metals and Metal-ceramic Composites. Part 1: Processing[J]. International Materials Reviews, 1995, 40(6): 239-265.
  • 5Xiang Xinhua, Zhu Jingchuan, et al. Fabrication and Microstructure of ZrO2/NiCrCoAlY Graded Coatings by Plasma Spraying[J]. Surface and Coatings Technology, 1996, 88: 66- 69.
  • 6E Ramous, L Giordano, et al. Laser Cladding of Ceramic and Metallic Coatings on Steel [J]. Key Engineering Materials, 1990, (46- 47): 425- 434.
  • 7张建民 林昌健 等.电流密度对钙磷生物陶瓷沉积层组成和结构的影响[J].功能材料,1998,.
  • 8朱诚意,郭忠诚,等.电沉积RE-Ni-W-P-SiC复合镀层耐蚀性研究[A].首界全国耐蚀耐磨技术及工程应用研讨会论文集[C],1998.
  • 9中国材料研究学会.97'中国材料研讨会论文集[M].北京:冶金工业出版社,1998.
  • 10富莉.渐变功能材料的开发动向及其展望[J].国外金属材料,1990(1):13-17. 被引量:9

引证文献3

二级引证文献32

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部