期刊文献+

Tb-Dy-Fe-Co合金本征磁致伸缩性能 被引量:4

INTRINSIC MAGNETOSTRICTION OF Tb-Dy-Fe-Co ALLOY
原文传递
导出
摘要 研究了Tb_(0.36)Dy_(0.64)(Fe_(0.85)Co_(0.15))_(1.95)合金中替换元素Co的分布及其对材料内禀磁性和本征磁致伸缩性能的影响.EDS分析表明,合金中产生了Co富集的富稀土相,Co在其中的含量为21.18%(原子分数),高于基体中Co的含量9.36%.Co元素部分替换Fe未改变巨磁致伸缩合金主相Laves相的结构,合金的Curie温度从378℃提高到420℃,拓展了应用温度范围;同时,Co元素的添加部分补偿了由于Tb/Dy比例提高所增大的磁晶各向异性,有利于改善合金低场性能.为避免样品的生长取向对本征磁致伸缩性能测量的影响,保证测量结果的准确性,制备了Tb_(0.36)Dy_(0.64)(Fe_(0.85)Co_(0.15))_(1.95)无取向等轴晶样品,测量了合金的饱和磁致伸缩常数λ_s.通过Laves相XRD谱中(440)峰的劈裂,计算了沿〈111〉方向上的磁致伸缩λ_(111),由此计算出沿〈100〉方向上的磁致伸缩λ_(100).与Tb_(0.3)Dy_(0.7)Fe_(1.95)合金相比,Co添加后λ_(111)稍有降低,λ_(100)得到显著提升,饱和磁致伸缩常数λ_s基本相当. The distribution of Co, the intrinsic magnetism and magnetostriction of quaternary Tb-Dy-Fe Co alloy were investigated. The SEM image showed the matrix (Laves phase) and the rare earth (RE) rich phase in the annealed samples. The Co content (atomic fraction) in the RE rich phase was 21.18%, much higher than that in the matrix (9.36%). XRD patterns showed that Co partial substitution for Fe did not change the structure of MgCu2 type cubic Laves phase, contributing to the giant magnetostriction. Curie temperature Tc was increased remarkably with Co addition, resulting in wider operating temperature. The magnetocrystalline anisotropy compensation by Co addition was beneficial to improving the magnetostrietion in low field. The solidified orientation influences the testing of intrinsic magnetostriction. In order to ensure the accuracy in the measurements, the equiaxed Tb-Dy-Fe Co samples were prepared. The saturated magnetostrictive constant As was tested. λ111 and ,λ100 were calculated by the cleavage of (440) diffraction peak of Laves phase. Compared with Terfenol-D alloy, λ111 in the Codoped sample decreased slightly, but λ100 increased evidently and As almost remained unchanged.
出处 《金属学报》 SCIE EI CAS CSCD 北大核心 2011年第2期214-218,共5页 Acta Metallurgica Sinica
基金 国家杰出青年科学基金项目50925101 国家创新研究群体科学基金项目50921003资助~~
关键词 元素分布 应用温度 磁晶各向异性 磁致伸缩 element distribution, operating temperature, magnetic anisotropy, magnetostriction
  • 相关文献

参考文献19

  • 1Clark A E. Ferromagnetic Materials. Vol.1, Amsterdam: North–Holland, 1980: 531.
  • 2Jiles D C. Acta Mater, 2003; 51: 5907.
  • 3Sato K, Ishikawa Y, Mori K, Clark A E, Callen E. J Magn Magn Mater, 1986; 54–57: 875.
  • 4Shi Y G, Tang S L, Yu J Y, Zhai L, Zhang X K, Du YW, Yang C P. J Appl Phys, 2009; 105: 07A925.
  • 5Chelvane J A, Palit M, Basumatary H, Pandian S, Chandrasekaran V. Scr Mater, 2009; 61: 548.
  • 6Zheng X P, Zhang P F, Li F S, Cheng Z H, Shen B G. J Magn Magn Mater, 2009; 321: 3842.
  • 7Xu L H, Jiang C B, Xu H B. Appl Phys Lett, 2006; 89: 192507.
  • 8Jiang C B, Ma T Y, Xu H B. J Alloys Compd, 2008; 449: 156.
  • 9Clark A E, Teter J P, Wun–Fogle M. J Appl Phys, 1991; 69: 5771.
  • 10Ma T Y, Jiang C B, Xu X, Xu H B. J Alloys Compd, 2005; 388: 34.

同被引文献14

引证文献4

二级引证文献5

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部