Experimental and CFD Simulations of Pressure Loss through Perforated Plates
Experimental and CFD Simulations of Pressure Loss through Perforated Plates
参考文献22
-
1B. Liu, L.D.III. Smith, M.E. Conner, M.B. Dzodzo, D.V Paramonov, Z.E. Karoutas, R.E Knott, M.Y. Young, CFD approach for investigating flow and heat transfer in PWR fuel assembly, 13th International Conference on Nuclear Engineering, ICONE 13-50924 Beijing, China, May 16-20, 2005.
-
2A. Aszodi, G. Legrad, Detailed CFD analysis of coolant mixing in VVER-440 fuel assemblies with the code CFX-5.5, Technical Meeting on Use of Computational Fluid Dynamics (CFD) Codes for Safety Analysis of Reactor Systems, Including Containment, Pisa, Italy, 11-15 November, 2002.
-
3T. Hoehne, G Gnmwald, H.M. Prasser, U. Rohde, Numerical investigation of the coolant mixing during fast deboration transients in Konvoi type reactors, CFX Users Conference, Unterhaching /Germany, 29-31 May, 2000.
-
4H. Anglart, O. Nylund, N. Kurul, M.Z. Podowski, CFD prediction of flow and phase distribution in fuel assemblies with spacers, Nuclear Engineering and Design 177 (1997) 215-228.
-
5J.H. Jeong, B.S. Han, A CFD analysis of coolant flow in a PWR lower plenum without geometrical simplification (Draft), 13th International Conference on Nuclear Engineering, Beijhlg, China, ICONE13-50621, May 16-20, 2005.
-
6G. Yadigaroglu, M. Andreani, J. Dreier, E Coddington, Trends and needs in experimentation and ntunerical simulation for LWR safety, Nuclear Engineering andDesign 221 (2005) 205-223.
-
7IAEA, Thermohydraulics Relationships for Advanced Water Cooled Reactors, TECDOC-1203, 2001.
-
8IAEA, Use of computational fluid dynamics codes for safety analysis of nuclear reactor systems, TECDOC-1379, 2002.
-
9Th. Schltiter, W. Mel-zkirch, PIV measurements of the time-averaged flow velocity downstream of flow conditioners in a pipeline, Flow Meas. Instrum 7 (1996) 173-179.
-
10E.E Spearman, J.A. Sattary, M.J. Reader-Harris, Comparison of velocity and turbulence profiles downstream of perforated plate flow conditioners, Flow Meas. Instrurn 7 (1996) 181-199.
-
1赵庆志,樊鹏.国内外关于用穿孔板共振器降低离心式风机噪声的研究[J].噪声与振动控制,1991,11(5):83-89. 被引量：1
-
2徐大伟.三维几何相似摆动从动件盘形凸轮机构相似系数与从动件名义推力之关系[J].机电工程,1990,7(4):54-56.
-
3李磊,牛朝阳,王魁.PVC穿孔板在通风机中的应用[J].机械工程师,2015(8):264-265.
-
4唐越.影响比表面积(勃氏法)测定结果的几个重要因素[J].昆明冶金高等专科学校学报,2006,22(1):16-18. 被引量：4
-
5刘莹,师恩洁.浅谈差压式流量计的设计计算及应用[J].中国计量,2016,0(4):68-70. 被引量：2
-
6大连重工研制出国内首台核电站起重机[J].机械工业标准化与质量,2011(8):6-6.
-
7陈智聪,杨建华,刘书红.改进型压水堆反应堆压力容器封头螺栓自动超声检测方法[J].无损检测,2014,36(7):63-66.
-
8李国志.水环式真空泵/压缩机相似理论设计方法[J].通用机械,2005(3):76-78. 被引量：4
-
9吕俊娥,梅健,王念辉,张立君.ASME B&PVC压水反应堆压力容器断裂韧性技术应用介绍[J].装备制造技术,2017(2):162-164. 被引量：1
-
10郑东宏,王仕航,吕俊娥,王江涛,张培敬.Ni-Cr-Fe合金690在压水堆核级承压设备中的应用[J].压力容器,2015,32(9):66-74. 被引量：4
