摘要
针对实验的方法获取机械结合面法向接触特性参数,首先将结合面间的接触状态等效成刚度和阻尼,建立了结合面法向接触的动力学数学模型,以该动力学模型为依据设计了实验试件结构和传感器安装结构。其次设计了实验数据采集与处理系统,获取机械结合面法向接触实验参数。
In order to obtain mechanical joint surface normal contact characteristic parameters using testing method, first, joint surface contact state simplified into an equivalent stiffness and damping, establish contact the dynamic mathematical models. In term with the dynamics model, the experimental specimens structure and sensor installation structure are designed. Second, the testing data collecting and processing system is designed. The joint surface testing parameters are obtained.
出处
《自动化与仪器仪表》
2011年第2期112-113,共2页
Automation & Instrumentation
基金
天水师范学院中青年教师科研项目"机械结合面基础特性实验与建模"(TSB0907)阶段性成果
国家重点基础研究发展计划(973)项目(2009CB724406)
关键词
结合面
法向接触
参数
实验
Joint
Normal contact
Parameters
Testing