期刊文献+

管材热浸镀锌磁场力抹锌的技术机理 被引量:1

The Principle of Galvanizing Technology Through Magnetic Force for Hot Dip Galvanized Pipes
下载PDF
导出
摘要 采用磁场力抹锌是一种新的尝试,利用电磁泵原理易控制镀层,避免了锌液的氧化和雾化,降低了噪音污染.探讨了磁场力的机理、设计计算,为应用推广该方法提供了参考. To solve these problems,a new method,galvanizing technology through magnetic force is given. Easy to control magnetic force wiping zinc coating,no zinc oxide and liquid atomization, no noise pollution. The principle and calculation of this method are explored.
出处 《甘肃科学学报》 2011年第1期100-102,共3页 Journal of Gansu Sciences
基金 浙江省重大科技专项(优先主题)计划(2008C011026)
关键词 热浸镀锌 磁场力 抹锌技术 hot dip galvanized magnetic force galvanizing
  • 相关文献

参考文献9

  • 1Li Liyi. Experimental Study on a Novel Linear Electromagnetic Pumping UnitrJ[J]. IEEE Transactions on Magnetics, 2001,1; : 219-222.
  • 2Yuan Zhaoyim A Free-electron Laser with an Electron Ring and Electromagnetic Pumping Wave[J]. 1992,1 : 246-253.
  • 3Takorabet N. Computation of Force Density Inside the Channel of an Electromagnetic Pump by Hermite Projectionr[J]. IEEE Transactions on Magnetics, 2006,3 : 430-433.
  • 4Hiddleston H R. Equations of Motion for a Free-Electron Laser with an Electromagnetic Pump Field and an Axial Electro-static Field[J]. IEEE Journal of Quantum Electronics, 1981,8: 1488-1495.
  • 5Gersem H D, Hameyer K. Air-gap Flux Splitting for the Time-har-monic Finite Elements Simulation of Single Phase Induction Machines[JT. IEEE Trans. Magn.2002, 38(2) : 1221-1224.
  • 6Mezani S, Laporte B, Takorabet N. Saturation and Space Harmonics in the Complex Finite Element Computation of Induction Motors [J]. IEEE Trans. Magn. , 2005,41 (5): 1460-1463.
  • 7Bossavit A. Magnetostatic Problems in Multiply Connected Regions:Some Properties of the Curl Operator[J]. Inst. Elect. Eng. Proc. ,pt. 1988,135(3) :179-187.
  • 8Laporte B,Takorabet N,Vinsard G. An Approach to Optimize Winding Design in Linear Induction Motors[J]. IEEE Trans. Magn. ,1997,33(2): 1844-1847.
  • 9杨逢瑜,齐学义,李桂花,郝燕文,骆明辉.磁流体密封压力与结构参数的确定[J].甘肃科学学报,2002,14(3):1-6. 被引量:4

共引文献3

同被引文献8

  • 1王英,陈辉明,张仲超.感应加热谐振电路新拓扑模型研究[J].浙江大学学报(工学版),2005,39(11):1807-1810. 被引量:2
  • 2CHEN M P, CHEN J K R, MASATOSHI N, et al. Surge a- nalysis of induction heating power supply with PLL [ J ]. IEEE Transactions on Power Electronics, 2001,16 ( 5 ) : 702-709.
  • 3OKUNO A, KAWANOH, SUN J, et al. Feasible develop- ment of soft-switched SIT inverter with load-adaptive fre- quency-tracking control scheme for induction heating [ J ]. IEEE Transactions on Industry Applicatons, 1998,34 (4) :718.
  • 4BAYTNDTR N S, KUKRER O, YAKUP M. DSP-based PLL-controlled 50-100 kHz 20 kW high-frequency induction heating system for surface hardening and welding applica- tions [ J ]. IEE Proceedings Electric Power Applications, 2003,150(5) :365-371.
  • 5AHMED N. High frequency soft switching AC conversion circuit with dual mode PWM/PDM control strategy for high power IH applications [ J ]. IEEE Transactions on Indus- try Electronics,2011,58 (4) : 1440-1448.
  • 6毛鸿,吴兆麟,候振程.感应加热电源无相差频率跟踪控制电路[J].电力电子技术,1998,32(2):69-72. 被引量:46
  • 7吴兆麟,袁俊国,于非.高频感应加热装置的负载匹配方法[J].电力电子技术,1999,33(4):29-32. 被引量:14
  • 8方斌.控制系统中的双线性变换研究[J].电子科技大学学报,2002,31(2):192-195. 被引量:9

引证文献1

二级引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部