摘要
Bending tests were conducted on 23 ferrocement slab specimens with steel meshes and continuous CFRP fibers. Two, or three, or four CFRP slices are gathered as a rope and hence these ropes are arranged to form a grid tied to a skeletal frame. The three patterns of slice reinforcement were used to reinforce cementitious slabs with or without conventional wire mesh reinforcement. The slabs were square and simply supported at their periphery with a clear span of 400 mm, and concentrically patch loaded to failure. For specimens designed to fail in flexure, the specimens reinforced with CFRP slices showed a smoother load deflection response and higher flexural capacity. For slabs designed to fail in punching shear, adding CFRP slices showed significant improvement in the ultimate shear capacity and ductility over reference specimens. Well distributed fine cracks of smaller width than control specimens were developed and no matrix spalling was observed.
