摘要
目的研究夜宁胶囊的成型工艺。方法分别考察干粉的粉体及颗粒的物理特性(吸湿率、休止角及堆密度等)。结果干粉的吸湿性较大、休止角较小;颗粒的流动性较差;通过制粒可以改善粉体的引湿性及休止角,更有利于装胶囊。结论夜宁胶囊提取物宜制成颗粒,改善粉体物理特性后进行灌装胶囊,提高成品率。
Objective To study the molding process of night-ning capsule.Methods Survey physical characteristics of the dry powder and the particle including hygroscopicity,angle of repose and bulk density,respectively.Results The dry powder has major hygroscopicity and minor angle of repose,and particle has minor fluidity.The hydroscopicity and angle of repose can be improved by granulation which can make the capsule loading easier.Conclusion The extracts of night-ning capsule is suitable to make the particle,and the yield of capsule is increased after improving the particle physical characteristics.
出处
《现代中药研究与实践》
CAS
2011年第2期52-54,共3页
Research and Practice on Chinese Medicines
关键词
夜宁胶囊
粉体
休止角
吸湿性
物理特性
Night-ning capsule
dry powder
angle of repose
hygroscopicity
physical characteristics.