摘要
根据相似理论,以国内某厂80 t单嘴精炼炉1∶4的水模型模拟了单嘴精炼炉吹气流量、吹气位置等工艺参数对混匀时间的影响。在水模型研究的基础上,通过数学模型仿真计算分析了不同吹气流量、吹气位置对单嘴精炼炉内流场的影响,数值计算结果与试验结果吻合较好。研究结果表明:吹气流量为6 L/min、吹气位置r/R为0.5范围内有利于缩短混匀时间。
According to similarity theory,the effects of process parameters on refining mixing time has been studied including gas blowing rate,gas blowing position by 1∶4 water model simulated for an 80 t single snorkel refining furnace.On the basis of water model,the analysis of gas blowing rate,gas blowing position on the single snorkel refining furnace flow field has done by simulation calculation.The results of mathematical calculation agree well with the experimental data.The results show that the appropriate scope of gas blowing rate and gas blowing position contribute to decreasing the mixing time.Under this experimental conditions,the gas flow rate is 6 L/min,and blowing air r/R is 0.5.
出处
《钢铁》
CAS
CSCD
北大核心
2011年第3期22-25,共4页
Iron and Steel
关键词
单嘴精炼炉
水模型
数值模拟
single snorkel refining furnace
water model
numerical simulation