期刊文献+

颗粒离散元法模拟卧式行星球磨机内钢球的运动规律 被引量:4

Motion simulation of grinding balls in horizontal planetary ball mills with distinct element method
原文传递
导出
摘要 采用颗粒离散元法模拟了卧式行星球磨机筒壁上的衬板对磨筒钢球运动规律的影响,包含衬板高度以及衬板数量的影响。研究结果表明:磨筒内钢球的平均接触力与钢球的运动状态存在明显的关联;磨筒内衬板高度为3mm、衬板数量为6根时,磨筒钢球的抛落状态最好,钢球的平均接触力最大。 The influence of the lining board on the motion of grinding balls in shells of horizontal planetary ball mills are simulated with distinct element method,and the height and the quantity of the lining board included.The study results show that the mean contact force are obviously related with the kinestate of grinding balls;when the thickness of the lining board is 3 mm and the quantity of the lining boards is 6,the grinding balls has the best kinestate and the mean contact force of grinding balls reaches the maximum.
出处 《矿山机械》 北大核心 2011年第4期55-59,共5页 Mining & Processing Equipment
基金 国家重点基础研究发展计划(2009CB623100)
关键词 卧式行星球磨机 钢球 离散元法 数值模拟 horizontal planetary ball mill grinding ball discrete element method numerical simulation
  • 相关文献

参考文献11

  • 1CUNDALL P A. A computer model for simulating progressiv1 large scale movements in blocky system [C] //'Muller Led. Pro~ Symplnt Soc Rock Mechanics. Rotterdam: Balkama A A, 19711 (1): 8-12.
  • 2C Thoruton. lnterparticle sliding in the presence of adhesion [J]. J PhysD:ApplPhys, 1991, 24: 1942-1946.
  • 3Thornton C, Yin K K. Impact of elastic spheres with and without adhesion[J]. Powder Technology, 1991, 65: 153-166.
  • 4Thornton C. On the relationship between the modulus of particulate media and surface energy of the constitue- nt particles [J]. J Phys D: ApplPhys, 1993, 26: 1587-1591.
  • 5王泳嘉 邢纪波.离散元法及其在岩土力学中的应用[M].沈阳:东北工学院出版社,1992..
  • 6鲁军.离散单元体法的数值模型研究及工程应用[D].北京:清华大学,1996.
  • 7周德义,马成林,左春柽,张守勤.散粒农业物料孔口出流成拱的离散单元仿真[J].农业工程学报,1996,12(2):186-189. 被引量:20
  • 8Cundall P A, Strack O D L A descrete numerical model for granu- lar assembles [J]. Geotechnique, 1979, 29(1): 47-65.
  • 9Kano, J., Mio, H., Saito, F., 1999. Correlation of size reduction rate of inorganic materials with impact energy of balls in plan- etary ball milling [J]. Journal of Chemical Engineering of Japan 32.445-448.
  • 10Kano, J., Mio, H., Saito, F., 2000. Correlation of grinding rate of gibbsite with impact energy of balls [J]. A.I.Ch.E. Journal 46, 1694-1697.

二级参考文献3

  • 1陆仲华,农业工程学报,1993年,9卷,1期,78页
  • 2王泳嘉,有色金属,1987年,39卷,2期,20页
  • 3赵学笃,农业物料学,1987年

共引文献22

同被引文献39

  • 1许根华,刘英杰,沈万慈,方鸿生.球磨机磨球的冲击及破损模拟试验[J].矿山机械,1994(2):18-22. 被引量:5
  • 2颜景平,党根茂.行星式球磨机最佳参数的理论分析[J].电子工业专用设备,1990(3):47-51. 被引量:14
  • 3FENG Y T, HAN K, OWEN D R J. Discrete element simulation of the dynamics of high energy planetary ball milling processes [J]. Materials Science and Engineering A, 2004, 375-377:815-819.
  • 4MIO Hiroshi, KANO Junya, SAITO Fumio, et al. Effects of rotational direction and rotation-to-revolution speed ratio in planetary ball milling [J]. Materials Science and Engineering A, 2002, 332 ( 1-2 ) : 75-80.
  • 5MIO Hiroshi, KANO Junya, SAITO Fumio, et al. Optimum revolu- tion and rotational directions and their speeds in planetary ball milling [J]. International Journal of Mineral Processing, 2004,74 (Suppl 1 ) : 85-92.
  • 6MIO Hiroshi, KANO Junya, SAITO Fumio. Scale-up method of planetary ball mill[J]. Chemical Engineering Science, 2004,59 (24): 5909-5916.
  • 7CUNDALI. P A , STRACK O D I.. A descrete numerical model for granular assembles[J]. Geoteehnique, 1979, 29(1) : 47-65.
  • 8KANO J , HIROSHI M , SALTO F . Correlation of size reduc- tion rate of inorganic materials with impact energy of balls in plan etary ball millin[J]. Journal of Chemical Engineering of Japan, 1999, 32(5):445-448.
  • 9KANO J, HIROSHI M , SALTO F . Correlation of grinding rate oi" gibbsite with impact energy uf balls[J]. A I Ch E Journal , 2000, 46(3):1694 1697.
  • 10HIROSHI M , KANO J , FUMIO S , et al. Effects of rotational direction and rotation-to revolution speed ratio in planetary ball milling[J]. Materials Science and Engineering A, '2002, 332(1- 2), 75-80.

引证文献4

二级引证文献10

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部