期刊文献+

Bending-Torsional Coupled Vibration Test of Large Power Gear Transmission System

Bending-Torsional Coupled Vibration Test of Large Power Gear Transmission System
下载PDF
导出
摘要 In order to test the bending-torsional coupled vibration characteristics of the multi-shafts gear transmission system of large power vehicles,a torsional vibration exciter was used to apply torsional excitation on the gear transmission systems and thirty-two acceleration sensors were used to measure the tangential acceleration of each shaft.Torsional vibration signals and bending vibration signals of each measuring point were obtained by calculation of the four-point-response signal.The modal parameters of gear transmission systems including nature frequency,modal shape and modal damping ratio were obtained by identifying modal parameters of the torsional vibration signal and bending vibration signal.The characteristic of the bending vibration and torsional vibration of the gear systems were studied through the analysis of the nature frequency and modal shape.The nonlinearity characteristic of the gear transmission system was investigated through single frequency excitation test,which can be the foundation for further nonlinearity research. In order to test the bending-torsional coupled vibration characteristics of the multi-shafts gear transmission system of large power vehicles,a torsional vibration exciter was used to apply torsional excitation on the gear transmission systems and thirty-two acceleration sensors were used to measure the tangential acceleration of each shaft.Torsional vibration signals and bending vibration signals of each measuring point were obtained by calculation of the four-point-response signal.The modal parameters of gear transmission systems including nature frequency,modal shape and modal damping ratio were obtained by identifying modal parameters of the torsional vibration signal and bending vibration signal.The characteristic of the bending vibration and torsional vibration of the gear systems were studied through the analysis of the nature frequency and modal shape.The nonlinearity characteristic of the gear transmission system was investigated through single frequency excitation test,which can be the foundation for further nonlinearity research.
出处 《Journal of Beijing Institute of Technology》 EI CAS 2010年第4期411-415,共5页 北京理工大学学报(英文版)
基金 Sponsored by the Ministerial Level Advanced Research Foundation(40402060103)
关键词 bending-torsional coupled gear transmission system modal parameters identify NONLINEARITY bending-torsional coupled gear transmission system modal parameters identify nonlinearity
  • 相关文献

参考文献7

二级参考文献12

  • 1刘峻华,黄树红,陆继东.单质量盘转子扭振的动频研究[J].华中科技大学学报(自然科学版),2005,33(8):12-15. 被引量:2
  • 2钟一鄂.转子动力学[M].北京:清华大学出版社,1987..
  • 3方同 薛璞.振动理论及应用[M].西北工业大学出版社,2000..
  • 4许本文,焦群英.机械振动与振动模态分析[M].北京:机械工业出版社,1988.
  • 5黄文梅,熊桂林,杨勇.信号分析与处理-MATLAB语言及应用[M].长沙:国防科技大学出版社,2001:216~217.
  • 6耿冲.车辆动力传动系统扭振建模分析与试验研究:学位论文.北京:北京理工大学,2004.
  • 7MingFu Liao and R.Gasch:Crack detection in rotating shafts-an experimental study.C432/106, IMechE 1992,Bath,England.
  • 8骆德渊,任雅萍,陈文艺,谭玉山.高速回转机械扭转振动测量的研究[J].中国激光,1997,24(9):809-813. 被引量:16
  • 9张建勋,罗德扬.扭转振动测试的实验研究[J].昆明理工大学学报(理工版),1998,23(1):68-74. 被引量:5
  • 10郭力,李波.轴系扭转振动测量方法评述[J].磨床与磨削,2000(3):53-56. 被引量:17

共引文献6

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部