摘要
通过对比实验,运用扫描电子显微镜分析了银端电极烧银后的显微结构,并用能谱分析仪对三种烧银后的银端电极进行成分分析,找出与自主研发的叠层片式铁氧体电感器用软磁铁氧体粉料相匹配的银端浆。实验结果和工艺验证表明:Ⅲ号ML78银端浆具有直流电阻低(≤0.61Ω)、温升低(≤16.2℃)等特点,完全满足MLCI批量化生产的要求。
By the contrast of experiment,the microstructure and components of three kinds of silver termination electrode sintered were studied with SEM and EDS to find out the sliver termination paste matching the independent research and development of soft ferrite materials for multilayer soft ferrite chip inductors.Results indicate that the No.Ⅲ（ML78） silver termination paste for electrode of MLCI has low direct current resistance（≤0.61Ω） and temperature rise（≤16.2 ℃）,etc.and is well fit for mass production of MLCI.
出处
《电子元件与材料》
CAS
CSCD
北大核心
2011年第5期42-45,共4页
Electronic Components And Materials
基金
贵州省火炬计划资助项目(No.黔科合G字(2006)5007)
关键词
MLCI
微观结构
成分分析
银端浆
MLCI
microstructure
components analysis
silver termination paste
