摘要
In this study, high performance shape memory polyurethane （SMPU）/silica nanocomposites with different silica weight fraction including SMPU bulk, 3%, 4.5%, 6%, 7.5%, 10%, were prepared by sol-gel process initiated by the solid acid catalyst of p-toluenesulfonic acid （PTSA）. Field emission scanning electron microscopy （FE-SEM） and transmission electron microscopy （TEM） observation show that the silica nanoparticles are dispersed evenly in SMPU/silica nanocomposites. Tensile test and dynamic mechanical analysis （DMA） suggest that the mechanical properties and the glass transition temperature （Tg） of the nanocomposites were significantly influenced by silica weight fraction. Thermogravimetric analysis （TGA） was utilized to evaluate the thermal stability and determine the actual silica weight fraction. The TGA results indicate that the thermal stability can be enhanced with the hybridization of silica nanoparticles. Differential scanning calorimetry （DSC） was conducted to test the melting enthalpy （△H） and the results suggest that the AH was markedly improved for the SMPU/silica nanocomposites. Thermomechanical test was conducted to investigate the shape memory behavior and the results show that the shape fixity is improved by hybridization of silica and good shape recovery can be obtained with the increasing of cycle number for all the samples.
In this study, high performance shape memory polyurethane （SMPU）/silica nanocomposites with different silica weight fraction including SMPU bulk, 3%, 4.5%, 6%, 7.5%, 10%, were prepared by sol-gel process initiated by the solid acid catalyst of p-toluenesulfonic acid （PTSA）. Field emission scanning electron microscopy （FE-SEM） and transmission electron microscopy （TEM） observation show that the silica nanoparticles are dispersed evenly in SMPU/silica nanocomposites. Tensile test and dynamic mechanical analysis （DMA） suggest that the mechanical properties and the glass transition temperature （Tg） of the nanocomposites were significantly influenced by silica weight fraction. Thermogravimetric analysis （TGA） was utilized to evaluate the thermal stability and determine the actual silica weight fraction. The TGA results indicate that the thermal stability can be enhanced with the hybridization of silica nanoparticles. Differential scanning calorimetry （DSC） was conducted to test the melting enthalpy （△H） and the results suggest that the AH was markedly improved for the SMPU/silica nanocomposites. Thermomechanical test was conducted to investigate the shape memory behavior and the results show that the shape fixity is improved by hybridization of silica and good shape recovery can be obtained with the increasing of cycle number for all the samples.
