期刊文献+

高炉喷吹焦炉煤气热平衡规律研究 被引量:1

Numerical Simulation on Heat Equilibrium of BF COG Injection
下载PDF
导出
摘要 在物料平衡和热量平衡的基础上,以大型高炉生产数据为支撑,建立了高炉喷吹焦炉煤气的数学模型。通过理论计算,分析了理论燃烧温度、炉腹煤气量、炉腹煤气成分及炉缸区总热量与焦炉煤气喷吹量之间的关系,为综合评价新工艺的可行性提供依据。 Based on the material balance and heat balance,according to lager-scale blast furnace production data,mathematical model on blast furnace with coke oven gas injection is established.The effects of COG(coke oven gas) injection quantity on theoretical combustion temperature,BF bosh gas volume,BF bosh gas composition and hearth total heat have been analyzed through theoretical calculation in this paper.These studies will provide the basis for the comprehensive evaluation of the feasibility of the new COG injection process.
出处 《钢铁钒钛》 CAS 北大核心 2011年第1期1-5,共5页 Iron Steel Vanadium Titanium
关键词 高炉 喷吹 焦炉煤气 热平衡 blast furnace injection coke oven gas heat balance
  • 相关文献

参考文献7

  • 1Tatsuro Ariyama, Michitaka Sato. Optimization of ironmaking process for reducing CO2 emissions in the integrated steel works [ J ]. ISIJ International ,2006,46 (12) : 1736.
  • 2Babich A, Yaroshevskll S, Formoso A,et al. CO - injection of noncoking coal and natural gas in blast furnace[J]. ISIJ International, 1999,39 (3) :229.
  • 3沙永志,曹军,王凤歧.高炉喷吹焦炉煤气[C]∥.第七届中国钢铁年会论文集.北京:冶金工业出版社,2009:692.
  • 4储满生,郭宪臻,沈峰满.高炉喷吹还原气操作的数学模拟研究[J].中国冶金,2007,17(6):34-39. 被引量:8
  • 5周传典主编.高炉炼铁生产技术手册[M].北京:冶金工业出版社,2008:32.
  • 6王筱留.钢铁冶金学(炼铁部分)[M].北京:冶金工业出版社,2006:85.
  • 7Abdel Halim K S, Andronov V N, Nasr M I. Blast furnace operation with natural gas injection and minimum theoretical flame temperature[J]. Ironmking and Steehnaking, 2009,36( 1 ) :12.

二级参考文献10

  • 1张健.提高高炉煤气利用率降低炼铁工序能耗[J].冶金动力,2005(2):17-18. 被引量:1
  • 2田国亮.山西焦化产业的新思考[J].山西焦煤科技,2005,29(3):21-25. 被引量:1
  • 3何平,罗昭林.攀钢转炉煤气回收系统存在问题及其改造措施的探讨[J].冶金能源,1995,14(4):44-47. 被引量:1
  • 4[4]M.Chu.Study on Super High Efficiency Operations of Blast Furnace Based on Multi-fluid Model[D].Sendai:TOHOKU University,2004,9.
  • 5[5]Tseitlin M A,Lazutkin S E,Styopin G M.A Flow-Chart for Iron Making on the Basis of 100% Usage of Process Oxygen and Hot Reducing Gases Injection[J].ISIJ International,1994,34(7):570-573.
  • 6[6]Babich A I,Gudenau H W,Mavrommatis K T,et al.Choice of Technological Regimes of a Blast Furnace Operation With Injection of Hot Reducing Gases[J].Rev.Metal Madrid,2002,38:241-312.
  • 7[7]Murai R,Sato M,Ariyama T.Combustion Behavior of Solid Fuel in Innovative Blast Furnace with Extra High Efficiency and Its Process Outline[A].Science and Technology of Innovative Ironmaking for Aiming at Energy Half Consumption[C].Tokyo,Japan:MEXT,2003.205-208.
  • 8[9]Austin P R,Nogami H,Yagi J.A Mathematical Model for Blast Furnace Reaction Analysis Based on the Four Fluid Model[J].ISIJ International,1997,37(8):748-755.
  • 9[10]Castro J A,Nogami H,Yagi J.Transient Mathematical Model of Blast Furnace Based on Multi-Fluid Concept,With Application to High PCI Operation[J].ISIJ International,2000,40(7):44-52.
  • 10[11]Nogami H.Improvement of Mathematical Model of Blast Furnace and Its Application to Practical Operation[J].Tetsu-to-Hagane,2003,89(2):211-220.

共引文献71

同被引文献8

引证文献1

二级引证文献3

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部