摘要
人造纤维板厂废水中纤维素含量较高,可生化性差,难以处理达标。采用ABR—SBR—接触氧化—气浮工艺处理某纤维板厂生产废水,工程实践表明,在进水CODCr10 552mg/L、NH3—N380mg/L、SS 784mg/L、pH 4.8时,出水CODCr88mg/L、NH3—N 5mg/L、SS 10mg/L、pH 6.8,各项指标均达到《污水综合排放标准》(GB 8978—1996)一级标准,取得较好的社会和经济效益。
出处
《给水排水》
CSCD
北大核心
2011年第5期46-47,共2页
Water & Wastewater Engineering