摘要
采用回收聚对苯二甲酸乙二酯(PET)增粘以及加入增韧剂的方法,通过一步法熔融共混挤出得到了具有良好力学性能的聚碳酸酯/回收PET(PC/RPET)合金。通过适当地增粘RPET以及合适地选择增韧剂,只需加入2.5%(质量)的增韧剂就可以得到力学性能与纯PC工程塑料相当的PC/RPET共混合金,同时成本比纯PC大幅度下降。
Melt blends of polycarbonate (PC) and recycled poly(ethylene terephthalate) (RPET) were prepared by one step extrusion. The selected PET chain extender and impact strength modifier were added to the system and synergistic effect was found. The toughness of PC/RPET blends could be greatly improved by adding only 2.5 wt% impact strength modifier. The mechanical properties of the toughened PC/RPET blends were comparable to those of pure PC but with lower cost.
出处
《合成树脂及塑料》
CAS
1999年第4期3-7,共5页
China Synthetic Resin and Plastics
关键词
聚碳酸酯
聚对苯二甲酯
乙二酯
共混合金
增韧
polycarbonate
poly(ethylene terephthalate)
melt blend
toughness
recovery